User Manual

77
 System monitor
There is only one type of system monitor widget.
When you click the [System Monitor] widget, the “System Monitor”
window appears, allowing you to check the device operating status
information that has collected by “ProVisionaire Monitoring Ser-
vice.”
The color changes if a fault occurs in a device.
 System monitor properties
Here we explain the parameters that are shown in the “Properties”
area when the focus is on a system monitor. Depending on the set-
tings, some parameters are not shown.
Areas whose Value field is darkly shaded cannot be edited.
Items with an “*” in Property are style-related information.
Property Value
[General] Overall properties of the widget
[Name] The name of the widget. If you place the
widget first and assign a parameter
later, you can enter a name here to indi-
cate the parameter that you intend to
assign.
[Type] The type of widget.
[Visible] Selects whether the widget is visible or
invisible in control mode.
[Position/Appear-
ance]
Overall appearance of the widget
[X] Specifies the horizontal distance from
the top left of the screen and the top left
of the widget.
[Y] Specifies the vertical distance from the
top left of the screen and the top left of
the widget.
[Width] Specifies the width of the widget.
[Height] Specifies the height of the widget.
[Lock Aspect
Ratio] *
Selects whether the width/height ratio
of the widget will be fixed.
[Shape] * Selects the shape of the widget.
[Corner] * Specifies the roundness of the widget’s
corners.
[Border Style] * Selects the type of border for the widget.
[Border Color] * Specifies the color of the widget’s bor-
der.
[Border Width] * Specifies the width of the widget’s bor-
der.
[Gradient] * Selects the type of gradation within the
widget.
[Effect]* Specifies how a shadow is added to the
outer part of the widget.
Property Value