User Manual

 “Run Controller File” dialog box

Here you can transfer a controller file to an iPad that is running Pro-

Visionaire Touch KIOSK and is on the same network, and execute it

on the iPad. This is shown if the “Type” of the selected controller is

“ProVisionaire Touch Kiosk (iOS).”

• (Refresh) button

Updates the iPad list.

• [Name]/[IP Address]

Shows information about the iPad units that are connected to the

same network as the computer running KIOSK and is running

ProVisionaire Touch KIOSK. When transferring a controller

file, select the transfer-destination in this field.

• [Run] button

Transfers the controller file to the iPad that is selected in the

[Name]/[IP Address] field. The receiving ProVisionaire Touch

KIOSK shows a confirmation screen.

• [Abort] button

Cancels controller file transfer.

• [Close] button

Closes the dialog box.