Studio Manager for / Installation Guide Keep This Manual For Future Reference.
i Important Information Exclusion of Certain Liability Manufacturer, importer, or dealer shall not be liable for any incidental damages including personal injury or any other damages caused by improper use or operation of Studio Manager for DM2000 or Studio Manager for 02R96. Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software.
ii Contents 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD-ROM Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Windows System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Macintosh System Requirements . . . . . . . . . . . . . . . . . . . . . .
Getting Started 1 1 Getting Started Introduction The Yamaha Studio Manager application allows you to control the Yamaha DM2000 Digital Production Console or Yamaha 02R96 Digital Mixing Console from a Windows or Macintosh computer. This Installation Guide explains how to install Studio Manager for DM2000 and Studio Manager for 02R96 and the necessary drivers for Windows and Macintosh computers.
2 Chapter 1—Getting Started Windows System Requirements The system requirements of your operating system may be different to those listed here.
Macintosh System Requirements 3 Macintosh System Requirements The system requirements of your operating system may be different to those listed here. Studio Manager for DM2000/Studio Manager for 02R96 Computer A Macintosh G3/233 MHz or better and a USB port OS Mac OS 8.6 to 9.2.
4 Chapter 1—Getting Started DM2000/02R96 Hookup The following illustration shows the three hookup methods that can be used to connect the DM2000/02R96 to your computer: serial, USB, or MIDI. DM2000/02R96 rear panel Mac or PC 1. Serial (Yamaha CCJ-Mac or equivalent) Mac serial port Serial cable (Yamaha CCJ-PC2 or equivalent) PC serial port 2. USB USB port USB cable 3. MIDI MIDI interface MIDI cables Note: Before you connect to serial or MIDI ports, turn off the DM2000/02R96 and your computer.
Windows Installation 5 2 Windows Installation Acrobat Reader 1 To view the Studio Manager for DM2000 Owner’s Manual or Studio Manager for 02R96 Owner’s Manual, you’ll need to install the Adobe Acrobat Reader software, which is included on the CD-ROM. If you already have this software installed, skip this section. Start your computer and Windows, and insert the included CD-ROM into your computer’s CD-ROM drive. 2 On the CD-ROM, double-click the “Acroread_” folder.
6 Chapter 2—Windows Installation Windows 98 & 98SE 1 Start your computer and Windows, and insert the included CD-ROM into your computer’s CD-ROM drive. 2 Turn off the DM2000/02R96 and use a USB cable to connect the USB TO HOST port on the DM2000/02R96 to a USB port on your computer. 3 Turn on the DM2000/02R96. The Add New Hardware Wizard appears. If it doesn’t appear, try disconnecting and reconnecting the USB cable. Alternatively, open the Add New Hardware control panel. 4 Click Next.
USB MIDI Driver 7 The following window appears. 6 Select “Specify a location,” and specify “D:\USBdrv_” (replacing “D” with the drive letter of your CD-ROM drive), and then click Next. When the driver is located, “YAMAHA USB MIDI Driver” is displayed, as shown below. 7 Click Next. Note: You may be prompted to insert your Windows CD-ROM.
8 Chapter 2—Windows Installation Windows Me 1 Start your computer and Windows, and insert the included CD-ROM into your computer’s CD-ROM drive. 2 Turn off the DM2000/02R96 and use a USB cable to connect the USB TO HOST port on the DM2000/02R96 to a USB port on your computer. 3 Turn on the DM2000/02R96. The Add New Hardware Wizard appears. If it doesn’t appear, try disconnecting and reconnecting the USB cable. Alternatively, open the Add New Hardware control panel.
USB MIDI Driver 9 Windows 2000 1 Start your computer and Windows, log on as the Administrator, and then insert the included CD-ROM into your computer’s CD-ROM drive. 2 Go to My Computer–>Control Panel–>System–>Hardware–>Driver Signing–>File Signature Verification, select “Ignore—Install all files, regardless of file signature,” and then click OK. 3 Turn off the DM2000/02R96 and use a USB cable to connect the USB TO HOST port on the DM2000/02R96 to a USB port on your computer.
10 Chapter 2—Windows Installation Windows XP 1 Start your computer and Windows, and insert the included CD-ROM into your computer’s CD-ROM drive. 2 Click the Start button, and then click Control Panel. If the Control Panel window appears as shown below, click “Switch to Classic View” on the left side of the window in order to see all the control panels.
Yamaha CBX Driver 11 Yamaha CBX Driver 1 If you are connecting the DM2000/02R96 to a serial port on your computer, you’ll need to install the Yamaha CBX driver. If you already have this software installed, skip this section. Double-click the “Mididrv_” folder on the CD-ROM. 2 Double-click “Setup.exe.” 3 Follow the on-screen instructions to install the software. Studio Manager for DM2000 1 Double-click the “SM_” folder on the CD-ROM. 2 Double-click the “DM2000” folder. 3 Double-click “Setup.exe.
12 Chapter 3—Macintosh Installation 3 Macintosh Installation Acrobat Reader 1 To view the Studio Manager for DM2000 Owner’s Manual or Studio Manager for 02R96 Owner’s Manual, you’ll need to install the Adobe Acrobat Reader software, which is included on the CD-ROM. If you already have this software installed, skip this section. Start your Macintosh, and insert the included CD-ROM into your computer’s CD-ROM drive. 2 Double-click the “Acroread_” folder on the CD-ROM.
USB MIDI Driver 13 USB MIDI Driver If you are connecting the DM2000/02R96 to a USB port on your computer, you’ll need to install the Yamaha USB driver. If you already have this software installed, skip this section. Computer Studio Manager USB cable OMS Driver DM2000/02R96 1 Start your Macintosh, and insert the included CD-ROM into your computer’s CD-ROM drive. 2 Double-click the “USBdrv_” folder on the CD-ROM. 3 Double-click “Install USB MIDI Driver.
14 Chapter 3—Macintosh Installation Studio Manager for 02R96 1 Start your Macintosh, and insert the included CD-ROM into your computer’s CD-ROM drive. 2 Double-click the “SM_” folder on the CD-ROM. 3 Double-click the “02R96” folder. 4 Double-click “Install Studio Manager.” 5 Follow the on-screen instructions to install the software. Card Filer (DM2000 only) 1 Start your Macintosh, and insert the included CD-ROM into your computer’s CD-ROM drive.
Setting up OMS 15 OMS Setup starts and the Studio Setup file window appears, as shown by this example, which is the DM2000-USB studio setup. The symbol next to the setup name in the title bar indicates that this is the current Studio Setup. 6 If the symbol is not displayed, choose Make Current from the File menu, and then save the setup. Note: If you are using the Modem or Printer port, go to OMS Setup Preferences and turn off “Use Apple SerialDMA driver when available.
16 Chapter 4—Troubleshooting 4 Troubleshooting Cannot control the DM2000/02R96 via USB • • • • • Have you installed the Yamaha USB MIDI driver (Windows page 5, Mac page 13)? Is the USB cable connected correctly (page 4)? Is the DM2000/02R96 configured correctly (page 4)? Is Studio Manager set to the correct ID? (see the Studio Manager documentation) Macintosh: Is OMS configured correctly (page 14)? On some systems, the included OMS studio setup files may not work correctly.
Troubleshooting 17 System Folder:Control Panels:YAMAHA USB MIDI Patch System Folder:Extensions:USB YAMAHA MIDI Diver System Folder:OMS Folder:YAMAHA USB MIDI OMS Driver Improving performance • • • If your computer seems unresponsive, make sure it satisfies the system requirements (Windows page 2, Mac page 3). Quit any other applications that you are not using. Macintosh: Try turning off virtual memory and AppleTalk.
18 Software Licensing Agreement The following is a legal agreement between you, the end user, and Yamaha Corporation (“Yamaha”). The enclosed Yamaha software program is licensed by Yamaha to the original purchaser for use only on the terms set forth herein. Please read this licensing agreement with care. Opening this package indicates that you accept all terms outlined herein. If you do not agree to the terms, return this package unopened to Yamaha for a full refund.
YAMAHA CORPORATION V954150 R0 1 IP 24 02 04 1230 AP Printed in Japan Pro Audio & Digital Musical Instrument Division P.O.
