Service manual

ENG
4-2
INSTALLING THE EXHAUST PIPE AND
MUFFLER
1. Install:
• gasket
(to muffler)
2. Install:
• exhaust pipe protector
3. Tighten:
• exhaust pipe protector screws
4. Install:
• gasket
• exhaust pipe
5. Tighten:
• nuts (exhaust pipe)
6. Install:
•clamp
N
O
TE:N
O
TE:
Slide the clamp onto the end of the muffler and
insert the projection of the clamp into a slot
in the muffler. Tighten the clamp after
installing the muffler.
Installed depth of gasket
3.5 mm (0.14 in)
Screw
8 Nm (0.8 m•kg, 5.9 ft•lb)
LOCTITE
®
Exhaust pipe nut
18 Nm (1.8 m•kg, 13 ft•lb)
ENGINE REMOVAL