Service manual

ENG
4-6
INSTALLING THE ENGINE
1. Install:
• Engine mounting bolt (rear lower side)
• Engine mounting bolt (rear upper side)
• Engine bracket bolts (upper side)
• Engine mounting bolt (upper side)
• Engine brackets (front side)
• Engine mounting bolt (front side)
N
O
TE:N
O
TE:
• The direction of the bolt insertion is made
from the right side of the body.
• Do not fully tighten the bolts and nuts.
2. Install:
• Crankcase bolt
3. Tighten:
• Engine bracket bolts (upper side)
• Engine mounting nut (rear lower side)
• Engine mounting nut (rear upper side)
• Engine mounting nut (upper side)
• Engine mounting nut (front side)
• Engine bracket bolts (front side)
• Crankcase nut
40 Nm (4.0 m
Engine bracket bolt (upper side)
33 Nm (3.3 m•kg, 24 ft•lb)
Engine mounting nut (rear lower
side)
66 Nm (6.6 m•kg, 49 ft•lb)
Engine mounting nut (rear upper
side)
66 Nm (6.6 m•kg, 49 ft•lb)
Engine mounting nut (upper side)
66 Nm (6.6 m•kg, 49 ft•lb)
Engine mounting nut (front lower
side)
40 Nm (4.0 m•kg, 30 ft•lb)
Engine bracket bolt (M8)
33 Nm (3.3 m•kg, 24 ft•lb)
Crankcase nut
40 Nm (4.0 m•kg, 30 ft•lb)
ENGINE REMOVAL