Service manual

ENG
4-59
4. Check:
• When the gear position is in Neutral, check
the length ( , ) between the tip of the
shift lever
and dowel pin are equal.
If not
→ Replace the shift shaft.
5. Install:
• Shift pedal
6. Tighten:
• Shift pedal bolt
7. Adjust:
• Shift pedal height
Refer to “ADJUSTING THE SHIFT PEDAL”
in chapter 3.
Shift pedal bolt
10 Nm (1.0 m•kg, 7.4 ft•lb)
SHIFT SHAFT