Service manual

ENG
4-63
CHECKING THE STARTER CLUTCH
1. Check:
• Starter clutch rollers
Damage/wear → Replace the starter
clutch.
2. Check:
• Starter idle gear
• Starter wheel gear
• Starter clutch gear
Burrs/chips/roughness/wear → Replace
the defective part(s).
3. Check:
• Starter clutch gear’s contacting surfaces
Damage/pitting/wear → Replace the
starter clutch gear.
4. Check:
• Starter clutch operation
a. Install the starter wheel gear onto the
starter clutch and hold the starter clutch.
b. When turning the starter wheel gear clock-
wise , the starter clutch and the starter
wheel gear should engage, otherwise the
starter clutch is faulty and must be
replaced.
c. When turning the starter wheel gear coun-
terclockwise , it should turn freely, other-
wise the starter clutch is faulty and must be
replaced.
5. Check:
•Shaft
Damage/fatigue/wear → Replace the
defective part(s).
PICKUP COIL ROTOR AND STARTER CLUTCH