Service manual

ENG
4-64
INSTALLING THE PICKUP COIL ROTOR
1. Install:
• Washer
Bearing
• Starter wheel gear
• Starter idle gear 2
2. Install:
• Woodruff key
• Pickup coil rotor
• Washer
• Pickup coil rotor bolt
N
O
TE:N
O
TE:
Clean the tapered portion of the crankshaft
and the rotor hub.
When installing the rotor, make sure the woo-
druff key is properly seated in the key way of
the crankshaft.
3. Tighten:
• Pickup coil rotor bolt
N
O
TE:N
O
TE:
Tighten the pickup coil rotor bolt while
holding the rotor with a sheave holder .
Do not allow the sheave holder to touch the
projection on the rotor .
Pickup coil rotor bolt
60 Nm (6.0 m•kg, 44 ft•lb)
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
PICKUP COIL ROTOR AND STARTER CLUTCH