Service manual

ENG
4-65
4. Install:
• Stater coil
• Pickup coil
5. Tighten:
• Stater coil bolts
• Pickup coil bolts
• Left crankcase cover bolt
6. Install:
• Dowel pin
• Crankcase cover gasket
7. Install:
• Left crankcase cover
8. Install:
• Crankcase cover bolts M6 × 30 mm
~
• Crankcase cover bolt M6 × 45 mm
• Crankcase cover bolts M6 × 40 mm
~
9. Tighten:
• Crankcase cover bolts
~
N
O
TE:N
O
TE:
Tighten the bolts in stages and in a crisscross
pattern as shown.
10.Install:
• Starter idle gear
1
•Shaft
11.Install:
• O-ring
• Starter idle gear cover
12.Tighten:
• Starter idle gear cover bolt
Stater coil bolt
10 Nm (1.0 m•kg, 7.4 ft•lb)
LOCTITE
®
Pickup coil bolt
10 Nm (1.0 m•kg, 7.4 ft•lb)
LOCTITE
®
Left crankcase cover bolt
7 Nm (0.7 m•kg, 5.2 ft•lb)
LOCTITE
®
Crankcase cover bolt
10 Nm (1.0 m•kg, 7.2 ft•lb)
Starter idle gear cover bolt
10 Nm (1.0 m•kg, 7.4 ft•lb)
PICKUP COIL ROTOR AND STARTER CLUTCH