Service manual
CHAS
6-7
EBS00390
INSTALLING THE WHEEL HUBS
1. Install:
• front axle nuts
• rear axle nuts
• cotter pins
N
O
TE:N
O
TE:
• Do not loosen the axle nut after torquing it. If
the axle nut groove is not aligned with the cot-
ter pin hole, align the groove with the hole by
tightening the axle nut.
• Bend the longer cotter pin up.
Front axle nut
70 Nm (7.0 m•kg, 52 ft•lb)
Rear axle nut
120 Nm (12.0 m•kg, 89 ft•lb)
FRONT AND REAR WHEELS