Service manual

SPEC

2-28

To the front panel

To the front fender

To the handlebar

To the right headlight

Make sure to route the oil cooler hoses 1and 2

through the guide wire.

Install the front brake hose 2, making sure to face

the white paint mark forward.

Route the oil cooler hose 1 and 2 between the

exhaust pipe and the engine bracket.

Route the battery negative lead behind the clutch

cable holder.

Route the air vent hose through the bracket.

Make sure that the white paint mark on the air filter

case breather hose

Make sure that the clip end is facing the left side of

the vehicle.

Route the throttle cable under the cross pipe and

left of the steering column as shown in the illustra-

tion.

CABLE ROUTING

H-H

A-A