Service manual

CHK
ADJ
3-26
EBS00080
CHASSIS
ADJUSTING THE FRONT BRAKE
1. Measure:
• brake lever free play
Out of specification → Bleed the front brake
system.
Refer to “BLEEDING THE HYDRAULIC
BRAKE SYSTEM”.
ADJUSTING THE BRAKE LEVER
(For adjustment type model)
1. Adjust:
• brake lever position
a. While pushing the brake lever forward,
loosen the locknut .
b. While pushing the brake lever forward, turn
the adjusting bolt in direction or
until the brake lever is in the desired posi-
tion.
c. Tighten the locknut.
CAUTION:
Be sure to tighten the locknut, as failing to
do so will cause poor brake performance.
EBS00085
ADJUSTING THE REAR BRAKE
1. Measure:
• rear brake pedal height
Out of specification → Adjust.
a
Brake lever free play
(at the end of the brake lever)
0 mm (0 in)
a
b
2
1
a
a
Rear brake pedal height
40.0 mm (1.57 in)
ADJUSTING THE FRONT BRAKE/ADJUSTING THE
BRAKE LEVER/ADJUSTING THE REAR BRAKE