User Manual
Table Of Contents
New reface CP Functions
17
reface CS / reface DX / reface CP / reface YC New Functions
Master Transpose
The Master Transpose function adjusts the sound produced by the keyboard in semitone units (where 12 semitones equals one
octave).
This allows you to, for example, change the key of a song while still playing the same keys on the keyboard.
Factory default setting: 0
Procedure
1. While holding down the A3, C#4, and E4 keys, set the [ ] (Standby/On) switch to On ( ). This activates Advanced
Settings mode.
In this mode, all of the [TYPE] lamps light up, and you can change parameters by using the keyboard.
2. While holding down the D2 key, press a key between C3 and C5.
Whenever you press a parameter selection key or a setting key, the lighting condition of the [TYPE] lamps changes
accordingly. No sound is produced during the setting process.
3. Release the D2 key and confirm that all of the [TYPE] lamps light up.
This indicates that your setting has been saved.
NOTICE
Do not turn off the instrument until all of the [TYPE] lamps have lit up. Failure to observe this precaution can lead
to data becoming corrupted.
A3 E4
C
#
4
-12
-11
-9
+1
+3
-6
-4
-2
+6
+8
+10
-10
-8
-7
-5
-3
-1
0
+2
+4
+5
+7
+9
+11
+12
B3C3 D3 E3 F3 G3 A3D2 C4 D4 E4 F4 G4 A4 B4 C5
C
#
4D
#
4F
#
4G
#
4A
#
4A
#
3G
#
3F
#
3D
#
3C
#
3
Setting keys
Master Transpose
Parameter selection keys (C2 to D#2)