User Manual

40
reface CS/DX/CP/YC Owner’s Manual
Restoring the Factory Default Settings
(Factory Reset)
When you do a Factory Reset, all parameters will be returned to their factory default
settings.
Using the Factory Reset
Function
q While holding down the rightmost key on the
keyboard, turn on the instrument.
 reface CS, reface CP, and reface
YC
The instrument’s lamps will flash.
 reface DX
The message “Factory reset” will be dis-
played on-screen.
When the Factory Reset has finished, the
lamps will stop flashing or the message will
disappear.
w When the lamps stop flashing or the message
is no longer displayed, remove your finger
from the keyboard.
 reface DX:
You can also use the [FUNCTION] button to do
a Factory Reset.
q Select the Job screen by pressing the [FUNC-
TION] button.
w Tap the “FCTRY RESET” switch.
A confirmation message will be displayed
on-screen.
e Tap the “YES” switch.
All parameters will be returned to their fac-
tory default settings.
NOTICE
• reface DX only:
All settings stored on the instrument by using the [FUNCTION] button will be overwritten
with their factory defaults when you do a Factory Reset.