User Manual

New reface CS Functions
12
reface CS / reface DX / reface CP / reface YC New Functions
Foot Volume / Sustain Switch
The Foot Volume / Sustain Switch function sets whether Foot Volume or Sustain is to be controlled via the [FOOT CONTROL-
LER] jack.
Factory default setting: Foot Volume
 Procedure
1. While holding down the F3 key, set the [ ] (Standby/On) switch to On ( ).
Each time you perform this operation, the setting toggles between Foot Volume and Sustain.
Display when set
Sustain (sustain-pedal selection)
The Sustain function is used to set which sustain pedal is being used with your reface. If you have connected an FC3 foot pedal
or an FC4 or FC5 foot switch, select “FC3” or “FC4/5” based on the pedal type (i.e., whether or not it supports half-damper
operation), and furthermore, use the Foot Volume / Sustain Switch function to set “Sustain.”
Factory default setting: FC4/5 (an FC4 or FC5, or an FC3 without half-damper operation)
 Procedure
1. While holding down the G2 key, set the [ ] (Standby/On) switch to On ( ).
Each time you perform this operation, the setting toggles between “FC3” and “FC4/5.”
Display when set
Foot Volume Lamps from the LOOPER section light up.
Sustain Lamps from the LOOPER section flash.
NOTE
Half-damper playing has no effect on the sound of the reface CS.
FC4/5 Lamps from the LOOPER section light up.
FC3 Lamps from the LOOPER section flash.
F3
G2