User Manual

reface CS / reface DX / reface CP / reface YC New Functions

New reface YC Functions

Yamaha has upgraded the reface YC firmware, adding the following new functions.

• Master Tuning

• Master Transpose

• Transmit Channel

• Receive Channel

In addition, when the rotary speed is FAST, you can now also switch to SLOW by moving the [ROTARY

SPEED] lever up once.

Master Tuning

The Master Tuning function sets the tuning for the entire instrument (414.8 to 466.8 Hz).

This can be very useful when you wish to tune your reface to the pitch of another instrument or a CD.

Factory default setting: 440.0 Hz

 Setting to either 440.0 Hz or 442.0 Hz

1. While holding down the A3 key, set the [ ] (Standby/On) switch to On ( ).

Each time you perform this operation, the master tuning will toggle between 440.0 Hz and 442.0 Hz.

Display when set

 Adjusting in 0.2-Hz steps

1. While holding down the A3, C#4, and E4 keys, set the [ ] (Standby/On) switch to On ( ). This activates Advanced

Settings mode.

In this mode, all of the [WAVE] lamps light up, and you can change parameters by using the keyboard.

440.0 Hz The ROTARY SPEED lamps light up.

442.0 Hz The ROTARY SPEED lamps flash.

A3 E4