User Manual

New reface CS Functions
11
reface CS / reface DX / reface CP / reface YC New Functions
Quantize Mode
Quantize mode lets you automatically quantize notes in real time as you record. Quantize aligns the timing of note events to the
nearest beat. On your reface CS, you can select either sixteenth notes or eighth-note triplets as the quantize timing.
While holding down the D3 key, press the [ ] (Standby/On) switch to toggle Quantize mode on and off. While holding down
the E3 key, press the [ ] (Standby/On) switch to toggle the quantize timing between sixteenth notes and eighth-note triplets.
Factory default setting: Quantize off
Quantize timing at sixteenth notes
Display when set
Guide / Click Sound Switch
The Guide / Click Sound Switch function sets whether a guide sound or a click sound should be produced when recording loop
phrases.
Factory default setting: Guide sound (the current sound)
 Procedure
1. While holding down the G3 key, set the [ ] (Standby/On) switch to On ( ).
Each time you perform this operation, the sound toggles between guide and click.
Display when set
Quantize on Lamps from the LOOPER section light up.
Quantize off Lamps from the LOOPER section flash.
Quantize timing at sixteenth notes Lamps from the LOOPER section light up.
Quantize timing at eighth-note triplets Lamps from the LOOPER section flash.
Guide sound Lamps from the LOOPER section light up.
Click sound Lamps from the LOOPER section flash.
D3 E3
Quantize Timing
Setting Quantize mode
Quantize On/Off
G3