User Manual

New reface CS Functions
7
reface CS / reface DX / reface CP / reface YC New Functions
 Adjusting in semitone units
1. While holding down the A3, C#4, and E4 keys, set the [ ] (Standby/On) switch to On ( ). This activates Advanced
Settings mode.
In this mode, all of the OSC [TYPE] lamps light up, and you can change parameters by using the keyboard.
2. While holding down the E2 key, press a key between C3 and C5.
Whenever you press a parameter selection key or a setting key, the lighting condition of the OSC [TYPE] lamps changes
accordingly. No sound is produced during the setting process.
3. Release the E2 key and confirm that all of the OSC [TYPE] lamps light up.
This indicates that your setting has been saved.
NOTICE
Do not turn off the instrument until all of the OSC [TYPE] lamps have lit up. Failure to observe this precaution can
lead to data becoming corrupted.
A3 E4
C
#
4
0 2 4 5 7 9
11 12 14 16 17 19 21 23 24
1 3 13 15 6 8 10 18 20 22
B3C3 D3 E3 F3 G3 A3E2 C4 D4 E4 F4 G4 A4 B4 C5
C
#
4D
#
4F
#
4G
#
4A
#
4A
#
3G
#
3F
#
3D
#
3C
#
3
Setting keys
Pitch Bend Range
Parameter selection keys (C2 to E2)