User Manual

reface Reference Manual
9
Setting the Pitch EG
The operators’ pitches can be changed using an envelope. As with the normal EG, levels set the
degree to which the pitches are affected; rates set the rate of change. These values are common to
all operators.
1. Press the [EDIT] button to activate Edit mode.
2. Press the [Pitch EG] button.
The Pitch EG Settings screen is displayed.
3. If necessary, press the [Pitch EG] button several times to switch between this screen’s pages.
4. Set the envelope by using the sliders.
5. When you have finished making settings, press the [EDIT] button once again to leave Edit mode.
 PITCH EG Level screen (page 1)
1 Pitch EG Level 1
-48 to 0 to +48
Adjust the Pitch EG levels.
The standard pitch is represented by “0”, and you can adjust the pitch
upward and downward by 48 semitones (4 octaves).
2 Pitch EG Level 2
3 Pitch EG Level 3
4 Pitch EG Level 4
Level 1
Level
Rate 1 Rate 2 Rate 3 Rate 4
Time
Key on Key off
0
+48
-48
Level 3
Level 2
Level 4
1234