User Manual

New reface CP Functions
20
reface CS / reface DX / reface CP / reface YC New Functions
2. While holding down the D#2 key, press a key between C3 and E4.
Whenever you press a parameter selection key or a setting key, the lighting condition of the [TYPE] lamps changes
accordingly. No sound is produced during the setting process.
3. Release the D#2 key and confirm that all of the [TYPE] lamps light up.
This indicates that your setting has been saved.
4. Play a key other than the parameter selection keys (C2 to D#2) to check the sound. If you need to continue adjusting,
return to Step 2 above.
5. Press the [ ] (Standby/On) switch to turn off the instrument and exit Advanced Settings mode.
In order to avoid changing other parameter settings while playing, be sure to always exit Advanced Settings mode after
changing settings.
Settings made in Advanced Settings mode are retained after you turn off the instrument.
NOTICE
Do not turn off the instrument until all of the [TYPE] lamps have lit up. Failure to observe this precaution can lead
to data becoming corrupted.
All
2 ch 4 ch 5 ch 7 ch 9 ch
11 ch 12 ch 14 ch 16 ch
1 ch 3 ch 13 ch 15 ch 6 ch 8 ch 10 ch
B3C3 D3 E3 F3 G3 A3 C4 D4 E4
C
#
4D
#
4A
#
3G
#
3F
#
3D
#
3C
#
3D
#
2
Setting keysParameter selection keys (C2 to D#2)
Receive Channel
C2 D2
D
#
2C
#
2
Sound produced
Parameter selection keys (C2 to D#2)
No sound produced