User Manual
USING THE ALARM FUNCTION
16 En
Note
The alarm setting will be erased if the system enters standby mode without
properly completing it.
1 Press and hold ALARM.
The alarm indicator ( ) and set alarm time will flash
.
2 Press / to set the alarm time.
3 Select the alarm type with the ALARM TYPE
switch on the rear panel.
For details on alarm types, refer to P. 15.
4 (when alarm types other than BEEP are selected)
Press SOURCE to select music source.
Sources other than AUX and Bluetooth can be selected.
Notes
• If CD/USB has been selected, connect/insert the audio source (audio/
data CD, USB device) to the unit.
• If source cannot be played back at the time set for the alarm (eg. CD
is not inserted), the beep sound is played back.
5 (when alarm types other than BEEP are selected)
Specify the track, folder or radio station to be
played.
Press PRESET to select the track (audio CD), folder (data
CD/USB device) or radio station to be played.
y
When “0” is set, the playback resumes from the track/radio station you
listened to last time (resume).
6 Set the alarm volume by pressing VOLUME –/+
.
7 Press ALARM to complete setting the alarm.
The alarm will be set, and the alarm indicator ( ) will
light up.
Set the alarm time and alarm type
Using the remote control
Press / .
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
17
2465
Top panel
Alarm indicator
Alarm time
BEEP
SOURCE+
BEEP
SOURCE
Rear panel
Using the remote control
Press the USB, CD, or RADIO button to select the
music source.
Using the remote control
Press PRESET /.
Alarm volume