User Manual

26
Using the alarm function
The unit includes an alarm function (IntelliAlarm) that plays back music sources or beeps (built-in alarm) at the set time in a variety of different methods. Before
using the alarm function, set the time in the clock ( P.7). The alarm function has following features.
3 types of alarms
Use “MusicCast CONTROLLER” to make setting. Select from 3 alarm types, combining music
and beep sounds. Follow the indication of “MusicCast CONTROLLER” to make setting.
Source
Network contents and radio can be selected. The following can also be selected depending
on the audio source.
Snooze
The alarm sound stops and resumes after 5 minutes ( P.28).
Source only
The selected audio source is played at the set time. The volume
fades in gradually and increases to the set volume.
Source with beep
The selected audio source and beep sound are played at the set
time. This mode is recommended for the best possible start to
the day.
3 minutes before the set time: the source music begins to fade
in and the volume gradually increases as the alarm time
approaches.
Alarm time: a beeping sound also begins playing.
None
If the beep has been turned on ( P.27), only the beep sound
will be played.
Source
Playback
method
Function
Network contents
Preset Plays back the specified network content.
Resume
Plays back the last network content played
back.
FM radio
Preset Plays the selected preset radio station.
Resume
The radio station you listened to last time is
played back.
DAB (ISX-18D)
Preset Plays the selected preset DAB station.
Resume
The DAB station you listened to last time is
played back.
• Devices connected via Bluetooth cannot be used as music source.