User Manual

13
reface CS / reface DX / reface CP / reface YC New Functions
New reface DX Functions
Yamaha has upgraded the reface DX firmware, adding the following new parameters.
• Master Tuning
• Master Transpose
• Quantize Mode
• Guide / Click Sound Switch
Master Tuning (M.TUNE)
Master Transpose (M.TP)
Master Tuning and Master Transpose can be set on the Tuning screen that has been added as Page 2 displayed by using the
[FUNCTION] button.
M.TUNE
(Master Tuning)
414.8 to 466.8 (Hz)
Shifts the pitch of the entire instrument in 0.2-Hz steps. This can be very useful when
you wish to tune your reface to the pitch of another instrument or a CD.
440.0 (Hz) Returns the Master Tuning to the factory default setting (440.0 Hz).
M.TP
(Master Transpose)
-12 to +12
Adjusts the sound produced by the keyboard in semitone units (where 12 semitones
equals one octave). This allows you to, for example, change the key of a song while
still playing the same keys on the keyboard.
NOTE
The MIDI Settings screen, the System Settings screen, and the Job screen can now be found on pages 3, 4, and 5,
respectively.
Page 2: Tuning screen