User Manual

New reface YC Functions
25
reface CS / reface DX / reface CP / reface YC New Functions
3. Release the C#2 key and confirm that all of the [WAVE] lamps light up.
This indicates that your setting has been saved.
4. Play a key other than the parameter selection keys (C2 to D#2) to check the sound. If you need to continue adjusting,
return to Step 2 above.
5. Press the [ ] (Standby/On) switch to turn off the instrument and exit Advanced Settings mode.
In order to avoid changing other parameter settings while playing, be sure to always exit Advanced Settings mode after
changing settings.
Settings made in Advanced Settings mode are retained after you turn off the instrument.
Receive Channel
The Receive Channel function sets the MIDI receive channel(s).
Factory default setting: All
 Procedure
1. While holding down the A3, C#4, and E4 keys, set the [ ] (Standby/On) switch to On ( ). This activates Advanced
Settings mode.
In this mode, all of the [WAVE] lamps light up, and you can change parameters by using the keyboard.
NOTICE
Do not turn off the instrument until all of the [WAVE] lamps have lit up. Failure to observe this precaution can lead
to data becoming corrupted.
C2 D2
D
#
2C
#
2
Sound produced
Parameter selection keys (C2 to D#2)
No sound produced
A3 E4
C
#
4