User Manual

27
reface CS / reface DX / reface CP / reface YC New Functions
Appendix
 Keyboard Settings
Various settings can be made by pressing the [ ] (Standby/On) switch while holding down a specific key on the keyboard.
If the instrument is turned on, you will need to turn it off once to make settings in this way.
Each setting is toggled on and off, etc. whenever this procedure is carried out. However, when you have set the Auto Power-Off
function to off (disabled), you will need to do a Factory Reset in order to turn in back on (enabled).
Keyboard settings are retained when the instrument is turned off.
On the reface DX, these settings can also be made by using the [FUNCTION] button. For details, refer to “Functions of Front
Panel Components” for the reface DX in the Owner’s Manual.
Master Tuning (CS/CP/YC)
Guide / Click Sound Switch (CS)
Foot Volume / Sustain Switch (CS)
Quantize Timing (CS)
Quantize On/Off (CS)
Pitch Bend Range (CS)
Pitch-bend Range Inversion (CS)
Transmit Channel (CS/DX)
Sustain (CS/DX/CP)
Local Control
MIDI Control
Speaker Output
Auto Power-Off
Factory Reset
C5C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3
C#2D#2
Setting Confirmation 2 (CS)
Setting Confirmation
*: Applicable models are shown in parentheses. Parameters
with no parentheses apply to all models.