User Manual

USING THE ALARM FUNCTION
18 En
With DTA CONTROLLER (☞ P. 6), you can use Weekly Alarm, which allows you to set alarm times respectively for each day of the week.
First, make the Weekly Alarm settings on DTA CONTROLLER.
 Setting Weekly Alarm with DTA CONTROLLER
1 Tap (IntelliAlarm icon) in DTA CONTROLLER
to open the IntelliAlarm setting screen.
2 Perform the operations below on the IntelliAlarm
setting screen.
a Select [Week] (Weekly Alarm).
b Set the alarm time for each day of the week.
c Set the alarm volume or IntelliAlarm advanced settings.
d Tap [Sync] to transfer the settings to the unit.
The Weekly Alarm function is activated and the alarm
indicator ( ) and Weekly Alarm indictor ( ) turn
on.
 Setting Weekly Alarm on the unit
Once you have set Weekly Alarm by DTA CONTROLLER, you can select the Weekly Alarm mode in the alarm mode select display of this
unit.
1 Press and hold ALARM.
The alarm indicator ( ) will flash and the alarm mode
select display will appear.
2 Select the alarm mode.
Press / to select the alarm mode, and press ALARM to
confirm it.
If you have chosen Weekly Alarm mode, this completes the
alarm setting. The alarm indicator ( ) and the Weekly
Alarm indicator ( ) will light up.
Note
The Weekly Alarm mode cannot be selected when all the days of the
Weekly Alarm setting are turned off. Turn on any day of the Weekly
Alarm setting.
Setting Weekly Alarm
IntelliAlarm setting screen
Due to product improvements, specifications and appearance
are subject to change without notice.
Using the remote control
Press / to select the alarm mode, and press
to confirm it.
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
12
2
Top panel
1d (One Day Alarm mode):
An alarm that sounds only
once at the specified time.
7d (Weekly Alarm mode):
An alarm whose time can be
specified for each day of the
week (settable only using
“DTA CONTROLLER”).
Weekly Alarm indicator
Alarm indicator