User Manual
En 31
Using the alarm function
English
Setting the alarm time
with the unit
1 Press and hold .
• and set alarm time will flash.
2 Press / to set the alarm time.
3 (when alarm types other than BEEP are
selected) Press either or to
select music source.
• Depending on the circumstances of the source
selected at the alarm time, sound may not be
output.
Continue to the next page\
3
1
2
3
• The alarm setting will be erased if the system
enters standby mode without properly
completing it.
• Set the alarm type by using “MusicCast
CONTROLLER.”
• You can use buttons on the unit to set the alarm.
1 Press and hold ALARM.
2 Press VOLUME -/+ to set the alarm time.
3 (When selecting an alarm type other than BEEP)
Press either of the SOURCE buttons to select
the source to play back.
4 (When selecting an alarm type other than BEEP)
Use PRESET to specify the song/radio station
to play back.
- Pressing the button once will resume the
content.
- To specify the track or ratio station to play back,
press the button repeatedly until the specified
preset number is displayed.
5 Press ALARM to finish the alarm setting.