Owner's Manual

8-11
7. Insert the dipstick into the oil filler hole,
and then tighten the oil filler cap.
8. Reinstall the console.
To change the engine oil (with or without
oil filter cartridge replacement)
1. Remove the console. (See page 8-9 for
console removal and installation proce-
dures.)
2. Start the engine, warm it up for several
minutes, and then turn it off.
3. Place an oil pan under the engine to col-
lect the used oil, and then remove the en-
gine oil filler cap.
4. Remove the engine oil drain bolt to drain
the oil from the crankcase.
1. Engine oil drain bolt
EE.book Page 11 Friday, August 3, 2007 11:59 AM