Owner's Manual

4-3
On-Command four-wheel-drive indicator
light “”
This indicator light comes on when the
On-Command four-wheel-drive switch is in
the “4WD” position.
Due to the synchronizing mechanism in the
differential gear case, the light may not come
on until the vehicle starts moving.
On-Command differential gear lock indica-
tor light “”
This indicator light comes on when the
On-Command differential gear lock switch is
set to the “LOCK” position.
EVU00181
Coolant temperature warning light “”
If the coolant temperature reaches a specified
level, this light comes on to warn that the cool-
ant temperature is too hot. If the light comes
on during operation, stop the engine as soon
as it is safe to do so and allow the engine to
cool down for about 10 minutes.
(See page 8-58.)
NOTICE
● The engine may overheat if the vehicle
is overloaded. If this happens, reduce
the load to specification.
● After restarting, make sure that the light
is out. Continuous use while the light is
on may cause damage to the engine.
DIFF.
LOCK
EE.book Page 3 Friday, August 3, 2007 11:59 AM