Owner's Manual

4-8
●
two tripmeters (which show the distance
traveled since they were last set to zero)
● a clock
● an hour meter (which shows the total time
the key has been turned to “ON”)
● a fuel meter
Odometer and tripmeter modes
Pushing the “TRIP/ODO” button switches the
display between the odometer mode “ODO”
and the tripmeter modes “A” and “B” in the fol-
lowing order:
ODO → TRIP A → TRIP B → ODO
To reset a tripmeter, select it by pushing the
“TRIP/ODO” button, and then hold the “TRIP/
ODO” button for at least three seconds. The
tripmeters can be used to estimate the dis-
tance that can be traveled with a full tank of fu-
el. This information will enable you to plan
future fuel stops.
Holding in the “TRIP/ODO” button and then
turning the key to “ON” switches the display
between “mph” and “km/h”.
EE.book Page 8 Friday, August 3, 2007 11:59 AM