Owner`s manual

8-8
To close
Lower the hood slowly to its original position,
and then hook the hood latches. Secure pro-
jections 1 on the rear of the hood into slots 2
on the back of the instrument panel. Secure
slots 3 on the side of the hood around
projections 4 on the frame.
1. Projection (× 2) 2. Slot (× 2)
3. Slot (× 2) 4. Projection (× 2)
NO
TI
C
E
● Make sure that all cables and wires are
in place when closing the hood.
● Do not drive the vehicle with the hood
open, unlatched, or removed.
EE.book Page 8 Friday, August 3, 2007 4:52 PM