Owner`s manual

8-33
EVU00810
Idle speed adjustment
A diagnostic tachometer must be used for this
procedure.
1. Start the engine and warm it up for a few
minutes at approximately 1,000 to
2,000 r/min. Occasionally rev the engine
to 4,000 to 5,000 r/min. The engine is
warm when it responds quickly to the
throttle with the choke off.
2. Remove the seats. (See page 4-13 for
seat removal and installation proce-
dures.)
3. Remove the console. (See page 8-9 for
console removal and installation proce-
dures.)
4. Connect the tachometer to the spark plug
lead, and then set the idle to the specified
idling speed by adjusting the throttle stop
screw. Turn the screw in direction a to
increase the engine speed, and in direc-
tion b to decrease the engine speed.
1. Throttle stop screw
5. Reinstall the console.
6. Reinstall the seats.
Specified idle speed:
1,450–1,550 r/min
EE.book Page 33 Friday, August 3, 2007 4:52 PM