User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Master fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Dante Device Lock
- Support for Dante Domain Manager
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
- Warning/Error Messages
- Index
- Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/Output Characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Monitor and Cue functions
V5 Reference Manual
116
MONITOR window
You can make detailed settings for monitoring. This window appears when you press the
MONITOR display button or meter field in the MONITOR screen.
SOURCE SELECT field
This field enables you to select the source signal for the MONITOR bus.
1 Source selection buttons
Select one of the following as the signal source that will be output to the MONITOR bus.
DIMMER field
This field enables you to make settings for the Dimmer function, which temporarily attenuates
monitor signals.
2 DIMMER knob
Adjusts the amount by which monitor signals will be attenuated when the Dimmer
function is on.
3 DIMMER ON/OFF button
Switches the Dimmer function on or off.
4 TALKBACK DIMMER knob
Adjusts the amount by which the monitor level will be attenuated when talkback is on.
5 TALKBACK ON indicator
Indicates the talkback on/off status.
6 PHONES LEVEL LINK button
Enables you to link the signal level at the PHONES Out jack to the monitor signal level.
Turn on this button to adjust the level of signals sent to the PHONES Out jack by using
the MONITOR FADER LEVEL knob
0 or the fader A to which this knob function has
been assigned.
NOTE
If the PHONES LEVEL LINK button is ON, use the MONITOR LEVEL knob and the monitor fader,
as well as the PHONES LEVEL knob to adjust the monitor level when monitoring through
headphones.
7 CUE INTERRUPTION button
Press this button to interrupt the monitor signal by the cue signal. If this button is on
and the cue is enabled, the cue signal will be sent to the monitor output. With the
factory default settings, this function is turned on. If you do not wish to send the cue
signal to the monitor output, switch this button off.
8 MONO MONITOR button
Turn on this button to switch the monitor output signal to mono.
9 MONITOR OUTPUT button
This button turns the monitor output on/off. When this button is turned on, the monitor
source selected in
1 is sent to output destination E.
NOTE
The PHONES output jack will always output the monitor signal, regardless of whether the
OUTPUT button is on or off.
STEREO L/R STEREO L/R channel signals
MONO (C) MONO channel signal
LCR STEREO L/R + MONO channel signals
OMNI 1-2 - 7-8 OMNI IN jacks 1 - 8 signals (per two channels)
PB OUT Recorder’s PLAYBACK OUT signals
DEFINE The signal(s) selected in the ASSIGN field
9
D
E
F
1
24 7
3
B
6 8
5 A0C