User Manual

ManualsBrandsYamaha ManualsAudio Interface UnitsYamaha Ri8-D

221

222

223

224

225

226

227

228

229

230

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL Section
Centralogic section
- Operations in the Centralogic section
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the input patching
- Changing the output patching
- Inserting an external device into a channel
- Directly outputting an INPUT channel
Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
OUTPUT channels
- Signal flow for output channels
- Specifying the channel name/icon
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- Using EQ
- Simultaneously setting EQ type
- Using dynamics
- Using the EQ/Dynamics libraries
Channel Job
- DCA group
- DCA Roll-out function
- Mute group
- Using the Recall Safe function
- Channel Link function
- Copying, moving, or initializing a channel
- About Mix Minus
Scene memory
- Storing and recalling scenes
- Editing scene memories
- Using the Global Paste function
- Using the Focus Recall function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
Talkback and Oscillator
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About AUTOMIXER
- Editing the internal effects
- Effects and tempo synchronization
- Using the Premium Rack
- Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries
I/O devices and external head amps
- Using an I/O device
- Remotely controlling an R series unit
- Third-party equipment’s HA control function
- Remotely controlling an amp
- Remotely controlling WIRELESS unit
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using program changes to recall scenes and library items
- Using control changes to control parameters
- Using parameter changes to control parameters
Recorder
- About the USB memory recorder
- Assigning channels to the input/output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Recording or playing back using a computer DAW
- Using the CL console with Nuendo Live
Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Master fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Dante Device Lock
- Support for Dante Domain Manager
- Using GPI (General Purpose Interface)
Help function
- Loading a Help/text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
Warning/Error Messages
Index
Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/Output Characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart

Setup

V5 Reference Manual

222

5 FILE LOAD

Specifies the types of file that can be loaded from USB flash drives. The user

authentication key contains the user level, USER DEFINED keys, and Preference settings.

Other data is saved in an “ALL” file. The “ALL” file also includes the USER SETUP settings

of the Administrator and the Guest.

• USER SETUP (USER DEFINED keys and Preferences settings)

• SYSTEM SETUP/MONITOR SETUP

• CURRENT SCENE

• SCENE LIST

• LIBRARY LIST

6 MONITOR SETUP

Specifies the monitor setup operations that can be performed.

•OSCILLATOR

• TALKBACK

•SOLO

7 SYSTEM SETUP

Specifies the system setup operations that can be performed.

• MIXER SETUP

• OUTPUT PORT

• MIDI/GPI

• DANTE SETUP

NOTE

• The content that is restricted with the DANTE SETUP button is as shown below.

• Changing the CONSOLE ID

• Changing the SECONDARY PORT setting

• Changing control of DANTE PATCH changes (THIS CONSOLE or DANTE CONTROLLER)

• Changing BIT DEPTH

• Changing LATENCY

• Changing DEVICE MOUNT

• Changing REMOTE HA ASSIGN

• Changing the Dante Input Patch

• Changing the Dante Output Patch

• Changing the Dante Input Patch Library (Changing Store, Recall, Clear, Library Name)

• If an operation is restricted, the message “This operation is not allowed.” is displayed at the

bottom of the screen.

• With the factory settings, this is turned off (no restrictions).

8 SET ALL/CLEAR ALL button

Permits/clears all items.

Preferences

Follow the steps below to make various settings for the CL console operating environment,

such as how windows appear, and whether [SEL] key on/off operations will be linked. These

settings are changed for the user who is logged-in, but if you are logged-in as the

Administrator, you will also be able to change the Guest settings.

NOTE

If you are logged-in as the Administrator, you can also turn on the FOR GUEST button to access

the PREFERENCE for Guest page and make preference settings for the Guest account.

USER SETUP window (PREFERENCE page)

1 STORE/RECALL field

Enables you to turn on or off options related to scene store/recall operations.

STEP

1. In the Function Access Area, press the SETUP button.

2. In the SETUP screen, press the USER SETUP button.

3. In the USER SETUP window, press the PREFERENCE tab.

4. Use the buttons on screen to make Preference settings.

5. When you have finished making settings, close the window and press the SETUP

button in the Function Access Area.