User Manual

附录
参考手册
245
*1) CL5: CH1–CH72, CL3: CH1–CH64, CL1: CH1–CH48, ST IN 1L–ST IN 8R, MIX1–MIX24, MTRX1–MTRX8,
ST L, ST R, MONO(C)
*2) CL5: CH1–CH72, CL3: CH1–CH64, CL1: CH1–CH48, ST IN 1–ST IN 8, MIX1–MIX24, MTRX1–MTRX8,
STEREO, MONO(C)
*3) MIX1–MIX24, MTRX1–MTRX8, ST L, ST R, MONO(C)
*4) CL5: CH1–CH72, CL3: CH1–CH64, CL1: CH1–CH48, ST IN 1–ST IN 8, MIX1–MIX24, MTRX1–MTRX8,
STEREO, MONO(C), DCA1–DCA16
可以分配到
USER DEFINED
旋钮的功能
SENDS ON
FADER
MIX1–MIX24
—
打开
/
关闭选定
MIX
的
MIX ON FADER
功能。
MTRX1–MTRX8
打开
/
关闭选定
MATRIX
的
MATRIX ON FADER
功能。
MIX ON FADER
打开
/
关闭
MIX ON FADER
功能。
MATRIX ON FADER
打开
/
关闭
MATRIX ON FADER
功能。
SENDS ON FADER
打开
/
关闭
SENDS ON FADER
功能。
SET BY SEL
SET [+48V]
—
按下该键，然后按下
SEL
打开
/
关闭。
在这期间，
[SEL]
键如果打开，它的
LED
将亮
起，如果关闭，
LED
将熄灭。
如果选定了
SET [PRE SEND]
， 按住
[SEL]
键
时，
“SEND ON FADER”
模式会被关联。
SET [Ø]
SET [INSERT ON]
SET [DIRECT OUT ON]
SET [PRE SEND]
SET [TO STEREO]
SET [TO MONO]
SET [TO LCR]
SET [GAIN
COMPENSATION]
SET DEFAULT
VALUE
——
按住该键，按下
Selected Channel
部分或
Centralogic
部分中的旋钮，可以将其重置为默
认状态。
SET
NOMINAL
VALUE
——
按住该键，按下
[SEL]
键将该通道的推子设置为
额定电平。
TALKBACK
TALKBACK ON
LATCH
打开
/
关闭
TALKBACK
。
UNLATCH
当按下时开启
TALKBACK
。
SELECTED CH ASSIGN —
当按住此键时，按
OUTPUT
通道的
SEL
键可打
开
/
关闭分配结果。在这期间，如果分配打开，
[SEL] LED
将亮起，如果分配关闭，
LED
会熄
灭。
按住该键时，完成的分配设置会被存储。再次
按下该键可以调出已存储的设置。设置可以存
储到多个键，以便今后快速切换分配结果。
DIRECT ASSIGN *3)
将
TALKBACK
分配到从列表
3)
中选定的通道。
TAP TEMPO
CURRENT PAGE —
使用显示画面中的击拍速度功能。
EFFECT RACK1–8 —
对指定的效果使用击拍速度功能。
FUNCTION PARAMETER 1 PARAMETER 2
说明
FUNCTION PARAMETER 1 PARAMETER 2 FUNCTION PARAMETER 1 PARAMETER 2
NO ASSIGN EXTERNAL HA GAIN1–GAIN8
BRIGHTNESS
LAMP HPF FREQUENCY
PANEL I/O RACK GAIN1–GAIN32
SCREEN INPUT DELAY DELAY TIME
CH COLOR
INPUT GAIN
ANALOG GAIN
NAME DIGITAL GAIN
CUE
INPUT PFL TRIM
MIDI CONTROL
CHANGE
CTRL 1–CTRL 31
DCA TRIM CTRL 33–CTRL 95
OUTPUT PFL TRIM CTRL 102–CTRL 119
DYNAMICS1
THRESHOLD
*2)
MONITOR
DIMMER LEVEL
RANGE TALKBACK DIMMER LEVEL
RATIO MONITOR DELAY
ATTACK MONITOR FADER
HOLD
OSCILLATOR
LEVEL
DECAY SINE WAVE FREQUENCY
RELEASE HPF
OUTGAIN LPF
KNEE WIDTH
WIDTH *13) INTERVAL
DYNAMICS2
THRESHOLD
*4)
OUTPUT PORT
DELAY TIME
RATIO GAIN
FREQUENCY TO MIX LEVEL MIX1–MIX24
ATTACK TO MATRIX LEVEL MATRIX1–MATRIX8
RELEASE TO MIX PAN MIX1/2–MIX23/24
OUTGAIN TO MATRIX PAN MATRIX1/2–MATRIX7/8
KNEE
TO ST/MONO
PAN/BAL
WIDTH CSR
EQ
ATT
*2)
TOUCH AND TURN
LOW Q
*2) SELECTED CH, CL5: CH1
–
CH72, CL3: CH1
–
CH64,
CL1: CH1
–
CH48, ST IN 1
–
ST IN 8, MIX1
–
MIX24,
*3) SELECTED CH, CL5: CH1
–
CH72, CL3: CH1
–
CH64,
CL1: CH1
–
CH48, ST IN 1L
–
ST IN 8R
*4) SELECTED CH, CL5: CH1
–
CH72, CL3: CH1
–
CH64,
CL1: CH1
–
CH48, ST IN 1
–
ST IN 8
*5) SELECTED CH, CL5: CH1
–
CH72, CL3: CH1
–
CH64,
CL1: CH1
–
CH48, ST IN 1L
–
ST IN 8R, MIX1
–
MIX24
*7) SELECTED CH, CL5: CH1
–
CH72, CL3: CH1
–
CH64,
CL1: CH1
–
CH48, ST IN 1L
–
ST IN 8R, MIX1
–
MIX24,
ST L, ST R, MONO (C)
*10)# 1
–
# 6
*11)# 1
–
# 8
*12)DANTE 1
–
DANTE64, OMNI 1
–
OMNI 8,
SLOT1 1
–
SLOT1 16, SLOT2 1
–
SLOT2 16,
SLOT3 1
–
SLOT3 16, DIGITAL OUT L,
DIGITAL OUT R
*13)SELECTED CH, MIX1
–
MIX24, MTRX1
–
MTRX8, STEREO,
MONO (C)
LOW FREQUENCY
LOW GAIN
LOW MID Q
LOW MID FREQUENCY
LOW MID GAIN
HIGH MID Q
HIGH MID FREQUENCY
HIGH MID GAIN
HIGH Q
HIGH FREQUENCY
HIGH GAIN