User Manual
Table Of Contents
- Как пользоваться данным справочным руководством
- Оглавление
- Иерархия функций
- Секция SELECTED CHANNEL (Выбранный канал)
- Секция Centralogic
- Подключение на входе и выходе
- Входные каналы
- Прохождение сигналов для входных каналов
- Определение названия и значка канала
- Настройка HA (предусилителя)
- Передача сигнала из входного канала на шину STEREO/MONO
- Добавлена функция панорамы (только для монофонических входных каналов)
- Передача сигнала из входного канала на шину MIX/MATRIX
- Индикация отображения имени канала
- Корректировка задержки между каналами (Задержка на входе)
- Вывод объемного звучания для входных каналов
- Операции с библиотеками каналов
- Каналы OUTPUT
- Эквалайзер и динамический процессор
- Задание канала
- Банки памяти сцен
- Сохранение и загрузка сцен
- Редактирование памяти сцен
- Применение функции Global Paste (Глобальная вставка)
- Использование функции Focus Recall
- Использование функции изменения громкости звука
- Вывод сигнала управления на внешнее устройство вместе с загрузкой сцены (GPI OUT)
- Воспроизведение аудиофайла, связанного с загрузкой сцены
- Использование режима предварительного просмотра
- Функции мониторинга и прослушивания
- Двусторонняя связь и осциллятор
- Индикаторы
- Графический эквалайзер, параметрический эквалайзер, эффекты и PREMIUM RACK
- Устройства ввода-вывода и внешние предусилители
- MIDI
- Функциональные возможности MIDI на консоли серии CL
- Основные настройки MIDI
- Применение изменений программы для вызова сцен и элементов библиотек
- Использование сообщений об изменении элемента управления для управления параметрами
- Использование сообщений об изменениях параметров для параметров органов управления
- Устройство записи
- О средстве записи в память USB
- Назначение входного и выходного канала средства записи
- Запись аудиофайлов на флеш-устройство USB
- Воспроизведение аудиофайлов с флеш-устройства USB
- Редактирование списка названий
- Запись или воспроизведение с помощью программного обеспечения DAW на компьютере
- Использование консоли CL с Nuendo Live
- Настройка
- Об экране SETUP (Настройка)
- Пользовательские настройки
- Предпочтения
- Клавиши USER DEFINED (Определяемые пользователем)
- Функции, которые можно назначить определяемым пользователем клавишам USER DEFINED (Определяемые пользователем)
- Определяемые пользователем регуляторы
- Функции, которые можно назначить для регуляторов USER DEFINED
- Доступные для переназначения преобразователи
- Функции, которые можно назначить для доступных для переназначения преобразователей
- Функции регулятора GAIN/PAN/ASSIGN (настраиваемого преобразователя)
- Пользовательский банк фейдеров
- Мастер-фейдер
- Функции пользовательского банка фейдеров
- Блокировка консоли
- Сохранение и загрузка данных настройки с/на флеш- устройство USB
- Форматирование флеш-устройства USB
- Добавлена функция повторного подключения флеш- устройств USB.
- Настройки синхронизации слов и гнезд
- Использование каскадных подключений
- Основные параметры для шин MIX и MATRIX
- Включение и выключение всего источника фантомного питания
- Настройка яркости сенсорного экрана, светодиодных индикаторов, экранов с названиями каналов и ламп
- Установка даты и времени внутренней синхронизации
- Установка сетевого адреса
- Настройки аудиосети Dante
- Использование универсального интерфейса GPI (General Purpose Interface)
- Функция справки
- Прочие функции
- Инициализация модуля с восстановлением заводских настроек по умолчанию
- Корректировка точки срабатывания сенсорного экрана (Функция калибровки)
- Корректировка фейдеров (Функция калибровки)
- Точная настройка входного и выходного усиления (функция калибровки)
- Регулировка цвета канала (Функция калибровки)
- Регулировка яркости отображения названия канала
- Регулировка контрастности отображения названия канала
- Инициализация настроек консоли аудиосети Dante
- Изменена процедура обновления микропрограммы NAME SUB CPU
- Добавлена функция обновления микропрограммы Dante
- Сообщения об ошибках/предупреждения
- Предметный указатель
- Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/output characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Data List
7
COMPANDER HARD (COMPANDER-H), COMPANDER SOFT (COMPANDER-S)
The hard and soft companders combine the effects of the compressor, expander and limiter.
The companders function differently at the following levels:
1 0 dB and higher ..................................Functions as a limiter.
2 Exceeding the threshold ....................Functions as a compressor.
3 Below the threshold and width ..........Functions as an expander.
The hard compander has an expansion ratio of 5:1, while the soft compander has an
expansion ratio of 1.5:1. The expander is essentially turned off when the width is set to
maximum. The compressor has a fixed knee setting of 2.
* The gain is automatically adjusted according to the ratio and threshold values, and can be increased by up to 18 dB.
* The OUT GAIN parameter enables you to compensate for the overall level change caused by the compression and
expansion processes.
DE-ESSER
This detects and compresses only the sibilants and other high-frequency consonants of the
vocal.
Effect Type List
Parameter Range Description
THRESHOLD (dB) -54 to 0 (55 points)
This determines the level at which compression is
applied.
RATIO
1.0:1, 1.1:1, 1.3:1, 1.5:1, 1.7:1, 2.0:1,
2.5:1, 3.0:1, 3.5:1, 4.0:1, 5.0:1, 6.0:1,
8.0:1, 10:1, 20:1 (15 points)
This determines the amount of compression.
ATTACK (ms) 0-120 (121 points)
This determines how soon the signal is compressed or
expanded once the compander has been triggered.
RELEASE (ms)
44.1kHz: 6 ms - 46.0 sec
48kHz: 5 ms - 42.3 sec (160 points)
This determines how soon the compressor or
expander returns to the normal gain once the trigger
signal level drops below or exceeds the threshold
respectively. The value is expressed as the duration
required for the level to change by 6 dB.
OUT GAIN (dB) -18.0 to 0.0 (181 points) This sets the compressor's output signal level.
WIDTH (dB) 1-90 (90 points)
This determines how far below the threshold
expansion will be applied. The expander is activated
when the level drops below the threshold and width.
Parameter Range Description
THRESHOLD -54 to 0 (55 points) Threshold level at which the de-esser effect is applied.
FREQUENCY 1kHz-12.5kHz (45 points)
Cutoff frequency of the filter used to detect the high
frequencies.
TYPE HPF, BPF Type of filter used to detect the frequency band.
Q 10.0-0.10 (41 points) Q (steepness) of the filter when TYPE is BPF.
0dB
Input Level
Output Level
WIDTH
THRESHOLD
Title Type Description
REV-X Hall REV-X HALL New reverb algorithm that delivers dense and rich reverberation, smooth decay,
and provides a spaciousness and depth that enhances the original sound.
Choose from three types depending on your location and needs: REV-X HALL,
REV-X ROOM, and REV-X PLATE.
REV-X Room REV-X ROOM
REV-X Plate REV-X PLATE
Reverb Hall REVERB HALL Concert hall reverberation simulation with gate
Reverb Room REVERB ROOM Room reverberation simulation with gate
Reverb Stage REVERB STAGE Reverb designed for vocals, with gate
Reverb Plate REVERB PLATE Plate reverb simulation with gate
Stereo Reverb ST REVERB Stereo reverb
Early Ref. EARLY REF. Early reflections without the subsequent reverb
Gate Reverb GATE REVERB Gated early reflections
Reverse Gate REVERSE GATE Gated reverse early reflections
Mono Delay MONO DELAY Simple mono delay
Stereo Delay STEREO DELAY Simple stereo delay
Mod.Delay MOD.DELAY Simple repeat delay with modulation
Delay LCR DELAY LCR 3-tap (left, center, right) delay
Echo ECHO Stereo delay with crossed left/right feedback
Chorus CHORUS Chorus
Flange FLANGE Flanger
Symphonic SYMPHONIC
Proprietary Yamaha effect that produces a richer and more complex modulation
than normal chorus
Phaser PHASER 16-stage stereo phase shifter
Dyna.Flange DYNA.FLANGE Dynamically controlled flanger
Dyna.Phaser DYNA.PHASER Dynamically controlled phase shifter
HQ. Pitch HQ.PITCH Mono pitch shifter, producing stable results
Dual Pitch DUAL PITCH Stereo pitch shifter
Tremolo TREMOLO Tremolo
Auto Pan AUTO PAN Auto-panner
Rotary ROTARY Rotary speaker simulation
Ring Mod. RING MOD. Ring modulator
Mod.Filter MOD.FILTER Modulated filter
Dyna.Filter DYNA.FILTER Dynamically controlled filter
Rev+Chorus REV+CHORUS Reverb and chorus in parallel
RevChorus REVCHORUS Reverb and chorus in series
Rev+Flange REV+FLANGE Reverb and flanger in parallel
RevFlange REVFLANGE Reverb and flanger in series
Rev+Sympho. REV+SYMPHO. Reverb and symphonic in parallel
RevSympho. REVSYMPHO. Reverb and symphonic in series
RevPan REVPAN Reverb and auto-pan in series
Delay+Er. DELAY+ER. Delay and early reflections in parallel
DelayEr
. DELAYER. Delay and early reflections in series