User Manual
Table Of Contents
- Как пользоваться данным справочным руководством
- Оглавление
- Иерархия функций
- Секция SELECTED CHANNEL (Выбранный канал)
- Секция Centralogic
- Подключение на входе и выходе
- Входные каналы
- Прохождение сигналов для входных каналов
- Определение названия и значка канала
- Настройка HA (предусилителя)
- Передача сигнала из входного канала на шину STEREO/MONO
- Добавлена функция панорамы (только для монофонических входных каналов)
- Передача сигнала из входного канала на шину MIX/MATRIX
- Индикация отображения имени канала
- Корректировка задержки между каналами (Задержка на входе)
- Вывод объемного звучания для входных каналов
- Операции с библиотеками каналов
- Каналы OUTPUT
- Эквалайзер и динамический процессор
- Задание канала
- Банки памяти сцен
- Сохранение и загрузка сцен
- Редактирование памяти сцен
- Применение функции Global Paste (Глобальная вставка)
- Использование функции Focus Recall
- Использование функции изменения громкости звука
- Вывод сигнала управления на внешнее устройство вместе с загрузкой сцены (GPI OUT)
- Воспроизведение аудиофайла, связанного с загрузкой сцены
- Использование режима предварительного просмотра
- Функции мониторинга и прослушивания
- Двусторонняя связь и осциллятор
- Индикаторы
- Графический эквалайзер, параметрический эквалайзер, эффекты и PREMIUM RACK
- Устройства ввода-вывода и внешние предусилители
- MIDI
- Функциональные возможности MIDI на консоли серии CL
- Основные настройки MIDI
- Применение изменений программы для вызова сцен и элементов библиотек
- Использование сообщений об изменении элемента управления для управления параметрами
- Использование сообщений об изменениях параметров для параметров органов управления
- Устройство записи
- О средстве записи в память USB
- Назначение входного и выходного канала средства записи
- Запись аудиофайлов на флеш-устройство USB
- Воспроизведение аудиофайлов с флеш-устройства USB
- Редактирование списка названий
- Запись или воспроизведение с помощью программного обеспечения DAW на компьютере
- Использование консоли CL с Nuendo Live
- Настройка
- Об экране SETUP (Настройка)
- Пользовательские настройки
- Предпочтения
- Клавиши USER DEFINED (Определяемые пользователем)
- Функции, которые можно назначить определяемым пользователем клавишам USER DEFINED (Определяемые пользователем)
- Определяемые пользователем регуляторы
- Функции, которые можно назначить для регуляторов USER DEFINED
- Доступные для переназначения преобразователи
- Функции, которые можно назначить для доступных для переназначения преобразователей
- Функции регулятора GAIN/PAN/ASSIGN (настраиваемого преобразователя)
- Пользовательский банк фейдеров
- Мастер-фейдер
- Функции пользовательского банка фейдеров
- Блокировка консоли
- Сохранение и загрузка данных настройки с/на флеш- устройство USB
- Форматирование флеш-устройства USB
- Добавлена функция повторного подключения флеш- устройств USB.
- Настройки синхронизации слов и гнезд
- Использование каскадных подключений
- Основные параметры для шин MIX и MATRIX
- Включение и выключение всего источника фантомного питания
- Настройка яркости сенсорного экрана, светодиодных индикаторов, экранов с названиями каналов и ламп
- Установка даты и времени внутренней синхронизации
- Установка сетевого адреса
- Настройки аудиосети Dante
- Использование универсального интерфейса GPI (General Purpose Interface)
- Функция справки
- Прочие функции
- Инициализация модуля с восстановлением заводских настроек по умолчанию
- Корректировка точки срабатывания сенсорного экрана (Функция калибровки)
- Корректировка фейдеров (Функция калибровки)
- Точная настройка входного и выходного усиления (функция калибровки)
- Регулировка цвета канала (Функция калибровки)
- Регулировка яркости отображения названия канала
- Регулировка контрастности отображения названия канала
- Инициализация настроек консоли аудиосети Dante
- Изменена процедура обновления микропрограммы NAME SUB CPU
- Добавлена функция обновления микропрограммы Dante
- Сообщения об ошибках/предупреждения
- Предметный указатель
- Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/output characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Data List
10
MOD. DELAY
One input, two output basic repeat delay with modulation.
DELAY LCR
One input, two output 3-tap delay (left, center, right).
ECHO
Two input, two output stereo delay with crossed feedback loop.
CHORUS
Two input, two output chorus effect.
Parameter Range Description
DELAY 0.0-2725.0 ms Delay time
FB. GAIN -99 to +99% Feedback gain
HI. RATIO 0.1-1.0 High-frequency feedback ratio
FREQ. 0.05-40.00 Hz Modulation speed
DEPTH 0-100% Modulation depth
WAVE Sine/Tri Modulation waveform
HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF/ON Tempo parameter sync on/off
DLY.NOTE
*1
*1. (Maximum value depends on the tempo setting)
Used in conjunction with TEMPO to determine DELAY
MOD.NOTE
*2
*2.
Used in conjunction with TEMPO to determine FREQ
Parameter Range Description
DELAY L 0.0-2730.0 ms Left channel delay time
DELAY C 0.0-2730.0 ms Center channel delay time
DELAY R 0.0-2730.0 ms Right channel delay time
FB. DLY 0.0-2730.0 ms Feedback delay time
LEVEL L -100 to +100% Left channel delay level
LEVEL C -100 to +100% Center channel delay level
LEVEL R -100 to +100% Right channel delay level
FB. GAIN -99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
HI. RATIO 0.1-1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF/ON Tempo parameter sync on/off
NOTE L
*1
*1. (Maximum value depends on the tempo setting)
Used in conjunction with TEMPO to determine left channel DELAY
NOTE C
*1
Used in conjunction with TEMPO to determine center channel DELAY
NOTE R
*1
Used in conjunction with TEMPO to determine right channel DELAY
NOTE FB
*1
Used in conjunction with TEMPO to determine feedback DELAY
Parameter Range Description
DELAY L 0.0-1350.0 ms Left channel delay time
DELAY R 0.0-1350.0 ms Right channel delay time
FB.DLY L 0.0-1350.0 ms Left channel feedback delay time
FB.DLY R 0.0-1350.0 ms Right channel feedback delay time
FB. G L -99 to +99%
Left channel feedback gain (plus values for normal-phase feedback, minus
values for reverse-phase feedback)
FB. G R -99 to +99%
Right channel feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
LR FBG -99 to +99%
Left to right channel feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
RL FBG -99 to +99%
Right to left channel feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
HI. RATIO 0.1-1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF/ON Tempo parameter sync on/off
NOTE L
*1
*1. (Maximum value depends on the tempo setting)
Used in conjunction with TEMPO to determine left channel DELAY
NOTE R
*1
Used in conjunction with TEMPO to determine right channel DELAY
NOTE FBL
*1
Used in conjunction with TEMPO to determine left channel feedback
DELAY
NOTE FBR
*1
Used in conjunction with TEMPO to determine right channel feedback
DELAY
Parameter Range Description
FREQ. 0.05-40.00 Hz Modulation speed
AM DEPTH 0-100% Amplitude modulation depth
PM DEPTH 0-100% Pitch modulation depth
MOD. DLY 0.0-500.0 ms Modulation delay time
WAVE Sine, Tri Modulation waveform
SYNC OFF/ON Tempo parameter sync on/off
NOTE
*1
*1.
Used in conjunction with TEMPO to determine FREQ
LSH F 21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G -12.0 to +12.0 dB Low shelving filter gain
EQ F 100 Hz-8.00 kHz EQ (peaking type) frequency
EQ G -12.0 to +12.0 dB EQ (peaking type) gain
EQ Q 10.0-0.10 EQ (peaking type) bandwidth
HSH F 50.0 Hz-16.0 kHz High shelving filter frequency
HSH G -12.0 to +12.0 dB High shelving filter gain