User Manual

24.8.1. "Microphone Settings" component editor
The tracking speed and range can be checked/adjusted.
The automixer settings can also be checked/changed.
• Mute Button Behavior
◦ Toggle
Mute on and off will be toggled by pressing the mute button.
◦ Push to talk
Microphone will be muted unless the button is pressed and held.
◦ Disable
Mute button on the device is disabled and mute status can only be changed externally (controller or
different microphone in same group).
•
Directivity
Sets the directivity of the microphone.
◦ Auto voice tracking
This is the default setting. Select this setting for automatic tracking mode. The microphone
automatically focuses on the voice of the person speaking.
◦ Omnidirectional
With this setting, all microphone elements are always active. Audio is picked up in the hemisphere
above the microphone. Multiple voices can be captured simultaneously using the Omni setting.
This setting should only be selected for quiet rooms with no reverberation and good acoustical
conditions.
◦ Cardioid
This setting allows to select the direction of up to 4 active cardioid pick-up patterns. Select this
setting if participants are always in the same location in relation to the microphone. Cardioid
requires that an auto-mixing strategy is selected.
◦ Supercardioid
Same as cardioid, but the directivity of the pick-up pattern is narrower than cardioid.
◦ Hypercardioid
Same as cardioid and Supercardioid, but the pick-up pattern is even narrower than supercardioid.
◦ Toroid
Select this setting in environments with noise sources above the microphone. Audio pick-up is
24. Microphones : RM-TT
ProVisionaire Design User Guide | 319