User Manual

10.9. "IP Address" dialog box
To open this dialog box, click the [Set IP Address] button in the [IP Settings] dialog box.
Here you can set the device’s IP settings. Set this so that there is no conflict between devices.

Editing is not possible while online.
In order to use ProVisionaire Design to control devices of differing subnets, it is necessary to operate the devices
using fixed IP addresses. For details, refer to "Settings for controlling devices across subnets".
■ For the DME7
Specify the parameters on the three tabs: DME Control Port, Device Control Port, and Dante Slot.
● DME Control Port and Device Control Port tabs
•
[Unit ID] radio button (DME Control Port tab only)
Automatically assigns the IP address based on the UNIT ID of the device.
This assigns the IP address as 192.168.0.UNIT ID and the subnet mask as 255.255.255.0.
•
[DHCP] option button
Click this button to automatically set the IP address, subnet mask, default gateway, and DNS server from
the DHCP server.
If there is no DHCP server, the DME Control Port parameters will not be defined. For the Device Control
Port, the link local address will be automatically set.
•
[Static IP] option button
Assigns a fixed IP address for the device.
•
[Default Gateway]text box
10. Dialog boxes
ProVisionaire Design User Guide | 67