User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- I/O devices and external head amps
- MIDI
- Recorder
- AFC IMAGE Control
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Main fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Dante Device Lock
- Support for Dante Domain Manager
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
- Warning/Error Messages
- Index
- Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/Output Characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Contents
V5.8 Reference Manual
2
Contents
How to Use This Reference Manual .......................................................................... 1
Function Tree ............................................................................ 4
SELECTED CHANNEL section ...................................................... 6
Operations in the SELECTED CHANNEL Section ....................................................... 6
Centralogic section ................................................................. 13
Operations in the Centralogic section .................................................................... 13
Input and output patching..................................................... 18
CL console internal patching and Dante audio network patching .......................... 18
Changing the input patching ................................................................................ 19
Changing the output patching .............................................................................. 21
Inserting an external device into a channel ............................................................ 23
Directly outputting an INPUT channel ................................................................... 26
Input channels ........................................................................ 29
Signal flow for input channels................................................................................ 29
Specifying the channel name/icon ......................................................................... 30
HA (head amp) settings ......................................................................................... 32
Sending the signal from an input channel to the STEREO/MONO bus ................... 38
Added pan function (Monaural input channels only) ............................................. 41
Sending a signal from an input channel to a MIX/MATRIX bus .............................. 43
Channel name display indication ........................................................................... 47
Correcting delay between channels (Input Delay).................................................. 48
Surround output for input channels....................................................................... 51
Channel library operations..................................................................................... 55
OUTPUT channels.................................................................... 56
Signal flow for output channels ............................................................................. 56
Specifying the channel name/icon ......................................................................... 57
Sending signals from MIX channels to the STEREO/MONO bus ............................. 58
Sending signals from MIX channels and STEREO/MONO channels to
MATRIX buses............................................................................................. 60
Correcting delay between channels (Output Delay)............................................... 63
Channel library operations..................................................................................... 64
EQ and Dynamics .................................................................... 65
Using EQ ............................................................................................................... 65
Simultaneously setting EQ type.............................................................................. 68
Using dynamics ...................................................................................................... 69
Using the EQ/Dynamics libraries............................................................................. 73
Channel Job ............................................................................. 74
DCA group............................................................................................................. 74
DCA Roll-out function ............................................................................................ 77
Mute group............................................................................................................ 79
Using the Recall Safe function................................................................................. 82
Channel Link function ............................................................................................ 85
Copying, moving, or initializing a channel.............................................................. 90
About Mix Minus.................................................................................................... 94
Scene memory ......................................................................... 95
Storing and recalling scenes ................................................................................... 95
Editing scene memories........................................................................................ 100
Using the Global Paste function............................................................................ 102
Using the Focus Recall function ............................................................................ 105
Using the Fade function........................................................................................ 106
Outputting a control signal to an external device in tandem with scene recall
(GPI OUT) ................................................................................................. 109
Playing back an audio file that links to a scene recall............................................. 110
Using Preview mode............................................................................................. 112
Monitor and Cue functions ................................................... 113
Using the Monitor function .................................................................................. 114
Using the Cue function......................................................................................... 120
Talkback and Oscillator......................................................... 129
Using Talkback ..................................................................................................... 129
Using the Oscillator function ................................................................................ 131
Meters.................................................................................... 134
Operations in the METER screen ........................................................................... 134
Using an MBCL meter bridge (optional) on the CL3 or CL1 console ..................... 139
Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK..... 140
About the virtual rack ........................................................................................... 140
Virtual rack operations .......................................................................................... 141
Graphic EQ operations ......................................................................................... 144
About AUTOMIXER............................................................................................... 151
Editing the internal effects .................................................................................... 154
Effects and tempo synchronization ....................................................................... 160
Using the Premium Rack....................................................................................... 161
Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries ............. 172