User Manual
Table Of Contents
- Como usar este Manual de Referência
- Sumário
- Árvore de funções
- Seção SELECTED CHANNEL (canal selecionado)
- Seção Centralogic
- Patch de entrada e saída
- Canais de entrada
- Fluxo do sinal para canais de entrada
- Especificando o nome/ícone do canal
- Configurações do HA (amplificador com cabeça)
- Enviando o sinal de um canal de entrada para o barramento STEREO/MONO
- Função de panorâmica adicionada (apenas canais de entrada mono)
- Enviando um sinal de um canal de entrada para um barramento MIX/MATRIX
- Indicação no visor do nome do canal
- Correção do atraso entre os canais (Input Delay)
- Saída surround para canais de entrada
- Operações da biblioteca de canais
- Canais OUTPUT
- EQ (equalizador) e dinâmica
- Trabalho de canal
- Memória de cena
- Armazenando e chamando cenas
- Edição de memórias de cena
- Uso da função Global Paste
- Usando a função Focus Recall
- Uso da função Fade
- Emitindo um sinal de controle para um dispositivo externo junto com a chamada de cena (GPI OUT)
- Reproduzindo um arquivo de áudio vinculado a uma chamada de cena
- Uso do modo de visualização
- Funções Monitor e Cue
- Talkback e Oscilador
- Medidores
- EQ gráfico, EQ paramétrico, efeitos e PREMIUM RACK
- Dispositivos de E/S e amplificadores com cabeça externos
- MIDI
- Gravador
- Configuração
- Sobre a tela SETUP (configuração)
- Configurações do usuário
- Preferências
- Teclas USER DEFINED
- Funções que podem ser atribuídas às teclas USER DEFINED
- Botões giratórios USER DEFINED
- Funções que podem ser atribuídas a botões giratórios USER DEFINED
- Codificadores atribuíveis
- Funções que podem ser atribuídas a codificadores atribuíveis
- Funções do botão giratório GAIN/PAN/ASSIGN (codificador atribuível)
- Banco de atenuadores personalizados
- Master Fader (atenuador mestre)
- Funções do banco de atenuadores personalizados
- Console Lock (bloqueio do console)
- Salvando e carregando dados de configuração de uma unidade flash USB
- Formatação de uma unidade flash USB
- Função de remontagem adicionada a unidades flash USB
- Configurações do Word Clock e dos compartimentos
- Usando conexões em cascata
- Configurações básicas dos barramentos MIX e MATRIX
- Como ligar/desligar toda a fonte de alimentação phantom
- Especificando o brilho da tela sensível ao toque, LEDs, visores de nome de canal e lâmpadas
- Definição da data e da hora do relógio interno
- Configuração do endereço de rede
- Configurações da rede de áudio Dante
- Dante Device Lock
- Compatibilidade com o Dante Domain Manager
- Uso da GPI (General Purpose Interface)
- Função Help (ajuda)
- Outras funções
- Inicializando a unidade com as configurações padrão de fábrica
- Ajustando o ponto de detecção da tela sensível ao toque (função Calibration (calibração))
- Ajustando os atenuadores (função Calibration)
- Fazendo ajustes finos no ganho de entrada e saída (função Calibration)
- Ajustando a cor do canal (função Calibration)
- Como ajustar o brilho do visor de nome do canal
- Como ajustar o contraste do visor de nome do canal
- Inicializando as configurações do console e da rede de áudio Dante
- Procedimento de atualização alterado para o firmware NAME SUB CPU
- Função de atualização adicionada ao firmware Dante
- Mensagens de advertência/erro
- Índice remissivo
- Data List
Data List
22
Buss Comp 369
MBC4
Parameter Range Description
INPUT ADJUST -15.0 to +15.0dB
Input gain. However, the output gain is also linked so that there
is no change in the pass-through volume. For example, if
INPUT ADJUST is +5dB, the input gain is +5dB and the output
gain is -5dB.
LINK ON, OFF Stereo link function (STEREO only)
METER IN, GR, OUT Meter switch (STEREO only)
VU IN, OUT Meter switch (DUAL only)
COMP IN ON, OFF Compressor on/off
COMP RATIO 1.5:1, 2:1, 3:1, 4:1, 6:1 Ratio of the compressor
COMP GAIN 0.0 to +20.0dB Compressor gain
COMP RECOVERY
100ms, 400ms, 800ms,
1500ms, a1, a2
Compressor release. The release times for a1 (auto 1) and a2
(auto 2) change automatically. a1: Changes automatically
between 100 ms and 2 sec. a2: Changes automatically
between 50 ms and 5 sec.
COMP THRESHOLD -40 to -5dBFS Threshold of the compressor
LIMIT IN ON, OFF Limiter on/off
LIMIT ATTACK FAST, SLOW Attack time of the limiter FAST: 2 ms, SLOW: 4 ms
LIMIT RECOVERY
50ms, 100ms, 200ms,
800ms, a1, a2
Limiter release. The release times for a1 (auto 1) and a2 (auto
2) change automatically. a1: Changes automatically between
100 ms and 2 sec. a2: Changes automatically between 50 ms
and 5 sec.
LIMIT THRESHOLD -16 to -5 dBFS Threshold of the limiter
Parameter Range Description
LOW CROSSOVER 20 to 500Hz Crossover frequency between the low and low mid bands
MID CROSSOVER 80 to 10kHz Crossover frequency between the low mid and high mid bands
HIGH CROSSOVER 1k to 15kHz
Crossover frequency between the low high mid and high
bands
LOW GAIN -18.0dB to 12.0dB Low band gain
LOW THRESHOLD -80.0dB to 0.0dB Threshold of low band
LOW RATIO 1.0:1 to 20.0:1 Ratio of low band
LOW ATTACK 0.1 to 120ms Attack time of low band
LOW RELEASE 5 to 1000ms Release time of low band
LOW COMP IN ON, OFF Switches the compressor of low band on/off
LOW CUE ON ON, OFF
If this is on, the low band signal will be sent to the CUE bus for
monitoring.
LOW MID GAIN -18.0dB to 12.0dB Low mid band gain
LOW MID
THRESHOLD
-80.0dB to 0.0dB Threshold of low mid band
LOW MID RATIO 1.0:1 to 20.0:1 Ratio of low mid band
LOW MID ATTACK 0.1ms to 120ms Attack time of low mid band
LOW MID RELEASE 5ms to 1000ms Release time of low mid band
LOW MID COMP IN ON, OFF Switches the compressor of low mid band on/off
LOW MID CUE ON ON, OFF
If this is on, the low mid band signal will be sent to the CUE bus
for monitoring.
HIGH MID GAIN -18.0dB to 12.0dB High mid band gain
HIGH MID
THRESHOLD
-80.0dB to 0.0dB Threshold of high mid band
HIGH MID RATIO 1.0:1 to 20.0:1 Ratio of high mid band
HIGH MID ATTACK 0.1ms to 120ms Attack time of high mid band
HIGH MID RELEASE 5ms to 1000ms Release time of high mid band
HIGH MID COMP IN ON, OFF Switches the compressor of high mid band on/off
HIGH MID CUE ON ON, OFF
If this is on, the high mid band signal will be sent to the CUE
bus for monitoring.
HIGH GAIN -18.0dB to 12.0dB High band gain
HIGH THRESHOLD -80.0dB to 0.0dB Threshold of high band
HIGH RATIO 1.0:1 to 20.0:1 Ratio of high band
HIGH ATTACK 0.1ms to 120ms Attack time of high band
HIGH RELEASE 5ms to 1000ms Release time of high band
HIGH COMP IN ON, OFF Switches the compressor of high band on/off
HIGH CUE ON ON, OFF
If this is on, the high band signal will be sent to the CUE bus for
monitoring.
MASTER GAIN -18.0dB to 12.0dB Master gain
KNEE HARD, 1, 2, 3, SOFT Knee of compressor
FLAVOUR VCA, OPTO Compressor type
HARMONICS ON, OFF Switches the harmonics on/off
LINK GAIN - Links and controls the gain of the four bands
LINK THRESHOLD - Links and controls the threshold of the four bands
LINK RATIO - Links and controls the ratio of the four bands
LINK ATTACK - Links and controls the attack time of the four bands
LINK RELEASE - Links and controls the release time of the four bands
Parameter Range Description