User Manual
Table Of Contents
- Как пользоваться данным справочным руководством
- Оглавление
- Иерархия функций
- Секция SELECTED CHANNEL (Выбранный канал)
- Секция Centralogic
- Подключение на входе и выходе
- Входные каналы
- Прохождение сигналов для входных каналов
- Определение названия и значка канала
- Настройка HA (предусилителя)
- Передача сигнала из входного канала на шину STEREO/MONO
- Добавлена функция панорамы (только для монофонических входных каналов)
- Передача сигнала из входного канала на шину MIX/MATRIX
- Индикация отображения имени канала
- Корректировка задержки между каналами (Задержка на входе)
- Вывод объемного звучания для входных каналов
- Операции с библиотеками каналов
- Каналы OUTPUT
- Эквалайзер и динамический процессор
- Задание канала
- Банки памяти сцен
- Сохранение и загрузка сцен
- Редактирование памяти сцен
- Применение функции Global Paste (Глобальная вставка)
- Использование функции Focus Recall
- Использование функции изменения громкости звука
- Вывод сигнала управления на внешнее устройство вместе с загрузкой сцены (GPI OUT)
- Воспроизведение аудиофайла, связанного с загрузкой сцены
- Использование режима предварительного просмотра
- Функции мониторинга и прослушивания
- Двусторонняя связь и осциллятор
- Индикаторы
- Графический эквалайзер, параметрический эквалайзер, эффекты и PREMIUM RACK
- Устройства ввода-вывода и внешние предусилители
- MIDI
- Функциональные возможности MIDI на консоли серии CL
- Основные настройки MIDI
- Применение изменений программы для вызова сцен и элементов библиотек
- Использование сообщений об изменении элемента управления для управления параметрами
- Использование сообщений об изменениях параметров для параметров органов управления
- Устройство записи
- О средстве записи в память USB
- Назначение входного и выходного канала средства записи
- Запись аудиофайлов на флеш-устройство USB
- Воспроизведение аудиофайлов с флеш-устройства USB
- Редактирование списка названий
- Запись или воспроизведение с помощью программного обеспечения DAW на компьютере
- Использование консоли CL с Nuendo Live
- Настройка
- Об экране SETUP (Настройка)
- Пользовательские настройки
- Предпочтения
- Клавиши USER DEFINED (Определяемые пользователем)
- Функции, которые можно назначить определяемым пользователем клавишам USER DEFINED (Определяемые пользователем)
- Определяемые пользователем регуляторы
- Функции, которые можно назначить для регуляторов USER DEFINED
- Доступные для переназначения преобразователи
- Функции, которые можно назначить для доступных для переназначения преобразователей
- Функции регулятора GAIN/PAN/ASSIGN (настраиваемого преобразователя)
- Пользовательский банк фейдеров
- Мастер-фейдер
- Функции пользовательского банка фейдеров
- Блокировка консоли
- Сохранение и загрузка данных настройки с/на флеш- устройство USB
- Форматирование флеш-устройства USB
- Добавлена функция повторного подключения флеш- устройств USB.
- Настройки синхронизации слов и гнезд
- Использование каскадных подключений
- Основные параметры для шин MIX и MATRIX
- Включение и выключение всего источника фантомного питания
- Настройка яркости сенсорного экрана, светодиодных индикаторов, экранов с названиями каналов и ламп
- Установка даты и времени внутренней синхронизации
- Установка сетевого адреса
- Настройки аудиосети Dante
- Dante Device Lock (Блокировка устройства Dante)
- Поддержка Dante Domain Manager
- Использование универсального интерфейса GPI (General Purpose Interface)
- Функция справки
- Прочие функции
- Инициализация модуля с восстановлением заводских настроек по умолчанию
- Корректировка точки срабатывания сенсорного экрана (Функция калибровки)
- Корректировка фейдеров (Функция калибровки)
- Точная настройка входного и выходного усиления (функция калибровки)
- Регулировка цвета канала (Функция калибровки)
- Регулировка яркости отображения названия канала
- Регулировка контрастности отображения названия канала
- Инициализация настроек консоли аудиосети Dante
- Изменена процедура обновления микропрограммы NAME SUB CPU
- Добавлена функция обновления микропрограммы Dante
- Сообщения об ошибках/предупреждения
- Предметный указатель
- Data List
Data List
13
AUTOPAN
Two input, two output autopanner.
ROTARY
One input, two output rotary speaker simulator.
RING MOD.
Two input, two output ring modulator.
MOD.FILTER
Two input, two output modulation filter.
DYNA.FILTER
Two input, two output dynamically controlled filter.
Parameter Range Description
FREQ. 0.05-40.00 Hz Modulation speed
DEPTH 0-100% Modulation depth
DIR.
*1
*1. LR, LR, LR , Tur n L, Tu r n R
Panning direction
WAVE Sine, Tri, Square Modulation waveform
SYNC OFF/ON Tempo parameter sync on/off
NOTE
*2
*2.
Used in conjunction with TEMPO to determine FREQ
LSH F 21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G -12.0 to +12.0 dB Low shelving filter gain
EQ F 100 Hz-8.00 kHz EQ (peaking type) frequency
EQ G -12.0 to +12.0 dB EQ (peaking type) gain
EQ Q 10.0-0.10 EQ (peaking type) bandwidth
HSH F 50.0 Hz-16.0 kHz High shelving filter frequency
HSH G -12.0 to +12.0 dB High shelving filter gain
Parameter Range Description
ROTATE STOP, START Rotation stop, start
SPEED SLOW, FAST
Rotation speed
(see SLOW and FAST parameters)
SLOW 0.05-10.00 Hz SLOW rotation speed
FAST 0.05-10.00 Hz FAST rotation speed
DRIVE 0-100 Overdrive level
ACCEL 0-10 Acceleration at speed changes
LOW 0-100 Low-frequency filter
HIGH 0-100 High-frequency filter
Parameter Range Description
SOURCE OSC, SELF Modulation source: oscillator or input signal
OSC FREQ 0.0-5000.0 Hz Oscillator frequency
FM FREQ. 0.05-40.00 Hz Oscillator frequency modulation speed
FM DEPTH 0-100% Oscillator frequency modulation depth
SYNC OFF/ON Tempo parameter sync on/off
FM NOTE
*1
*1.
Used in conjunction with TEMPO to determine FM FREQ
Parameter Range Description
FREQ. 0.05-40.00 Hz Modulation speed
DEPTH 0-100% Modulation depth
PHASE 0.00-354.38 degrees Left-channel modulation and right-channel modulation phase difference
TYPE LPF, HPF, BPF Filter type: low pass, high pass, band pass
OFFSET 0-100 Filter frequency offset
RESO. 0-20 Filter resonance
LEVEL 0-100 Output level
SYNC OFF/ON Tempo parameter sync on/off
NOTE
*1
*1.
Used in conjunction with TEMPO to determine FREQ
Parameter Range Description
SOURCE INPUT, MIDI
Control source:
input signal or MIDI Note On velocity
SENSE 0-100 Sensitivity
DIR. UP, DOWN Upward or downward frequency change
DECAY
*1
*1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)
Filter frequency change decay speed
TYPE LPF, HPF, BPF Filter type: low pass, high pass, band pass
OFFSET 0-100 Filter frequency offset
RESO. 0-20 Filter resonance
LEVEL 0-100 Output level