User Manual
Table Of Contents
- Как пользоваться данным справочным руководством
- Оглавление
- Иерархия функций
- Секция SELECTED CHANNEL (Выбранный канал)
- Секция Centralogic
- Подключение на входе и выходе
- Входные каналы
- Прохождение сигналов для входных каналов
- Определение названия и значка канала
- Настройка HA (предусилителя)
- Передача сигнала из входного канала на шину STEREO/MONO
- Добавлена функция панорамы (только для монофонических входных каналов)
- Передача сигнала из входного канала на шину MIX/MATRIX
- Индикация отображения имени канала
- Корректировка задержки между каналами (Задержка на входе)
- Вывод объемного звучания для входных каналов
- Операции с библиотеками каналов
- Каналы OUTPUT
- Эквалайзер и динамический процессор
- Задание канала
- Банки памяти сцен
- Сохранение и загрузка сцен
- Редактирование памяти сцен
- Применение функции Global Paste (Глобальная вставка)
- Использование функции Focus Recall
- Использование функции изменения громкости звука
- Вывод сигнала управления на внешнее устройство вместе с загрузкой сцены (GPI OUT)
- Воспроизведение аудиофайла, связанного с загрузкой сцены
- Использование режима предварительного просмотра
- Функции мониторинга и прослушивания
- Двусторонняя связь и осциллятор
- Индикаторы
- Графический эквалайзер, параметрический эквалайзер, эффекты и PREMIUM RACK
- Устройства ввода-вывода и внешние предусилители
- MIDI
- Функциональные возможности MIDI на консоли серии CL
- Основные настройки MIDI
- Применение изменений программы для вызова сцен и элементов библиотек
- Использование сообщений об изменении элемента управления для управления параметрами
- Использование сообщений об изменениях параметров для параметров органов управления
- Устройство записи
- О средстве записи в память USB
- Назначение входного и выходного канала средства записи
- Запись аудиофайлов на флеш-устройство USB
- Воспроизведение аудиофайлов с флеш-устройства USB
- Редактирование списка названий
- Запись или воспроизведение с помощью программного обеспечения DAW на компьютере
- Использование консоли CL с Nuendo Live
- Настройка
- Об экране SETUP (Настройка)
- Пользовательские настройки
- Предпочтения
- Клавиши USER DEFINED (Определяемые пользователем)
- Функции, которые можно назначить определяемым пользователем клавишам USER DEFINED (Определяемые пользователем)
- Определяемые пользователем регуляторы
- Функции, которые можно назначить для регуляторов USER DEFINED
- Доступные для переназначения преобразователи
- Функции, которые можно назначить для доступных для переназначения преобразователей
- Функции регулятора GAIN/PAN/ASSIGN (настраиваемого преобразователя)
- Пользовательский банк фейдеров
- Мастер-фейдер
- Функции пользовательского банка фейдеров
- Блокировка консоли
- Сохранение и загрузка данных настройки с/на флеш- устройство USB
- Форматирование флеш-устройства USB
- Добавлена функция повторного подключения флеш- устройств USB.
- Настройки синхронизации слов и гнезд
- Использование каскадных подключений
- Основные параметры для шин MIX и MATRIX
- Включение и выключение всего источника фантомного питания
- Настройка яркости сенсорного экрана, светодиодных индикаторов, экранов с названиями каналов и ламп
- Установка даты и времени внутренней синхронизации
- Установка сетевого адреса
- Настройки аудиосети Dante
- Dante Device Lock (Блокировка устройства Dante)
- Поддержка Dante Domain Manager
- Использование универсального интерфейса GPI (General Purpose Interface)
- Функция справки
- Прочие функции
- Инициализация модуля с восстановлением заводских настроек по умолчанию
- Корректировка точки срабатывания сенсорного экрана (Функция калибровки)
- Корректировка фейдеров (Функция калибровки)
- Точная настройка входного и выходного усиления (функция калибровки)
- Регулировка цвета канала (Функция калибровки)
- Регулировка яркости отображения названия канала
- Регулировка контрастности отображения названия канала
- Инициализация настроек консоли аудиосети Dante
- Изменена процедура обновления микропрограммы NAME SUB CPU
- Добавлена функция обновления микропрограммы Dante
- Сообщения об ошибках/предупреждения
- Предметный указатель
- Data List
Data List
20
M.BAND COMP
Two input, two output 3-band compressor, with individual solo and gain reduction metering for
each band.
Premium Rack Processor Parameters
Portico5033
This models an analog 5-band EQ made by the RND company.
Portico5043
This models an analog compressor/limiter made by the RND company.
LIM.ATK 0-120 ms Attack time of the limiter
LIM.REL
*1
Release time of the limiter
LIM.KNEE 0-5 Knee of the limiter
LIM.BYP OFF/ON Bypasses the limiter
PRESENCE -10 to +10
Positive (+) values lower the threshold of the high band and raise the
threshold of the low band. Negative (-) values do the opposite. If this is
set to 0, the high, mid, and low bands will be affected in the same way.
LOOKUP 0.0-100.0 ms Lookup delay
MAKE UP OFF/ON Automatically adjusts the output level
*1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)
Parameter Range Description
L-M XOVER 21.2 Hz-8.00 kHz Crossover frequency between the low and mid bands
M-H XOVER 21.2 Hz-8.00 kHz Crossover frequency between the mid and high bands
SLOPE -6 dB, -12 dB Filter slope
LOW GAIN -12.0 dB to +12.0 dB Low band gain
MID GAIN -12.0 dB to +12.0 dB Mid band gain
HI. GAIN -12.0 dB to +12.0 dB High band gain
TOTAL -72.0 dB to +12.0 dB Overall gain
CEILING -6.0 dB to 0.0 dB, OFF Restricts the output so that it will not exceed the specified level
LOW THRE -54.0 dB to 0.0 dB Threshold of the low band compressor
LOW RAT 1:1 to 20:1 Ratio of the low band compressor
LOW ATK 0-120 ms Attack time of the low band compressor
LOW REL
*1
*1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)
Release time of the low band compressor
LOW KNEE 0-5 Knee of the low band compressor
LOW BYP OFF/ON Bypasses the low band compressor
MID THRE -54.0 dB to 0.0 dB Threshold of the mid band compressor
MID RAT 1:1 to 20:1 Ratio of the mid band compressor
MID ATK 0-120 ms Attack time of the mid band compressor
MID REL
*1
Release time of the mid band compressor
MID KNEE 0-5 Knee of the mid band compressor
MID BYP OFF/ON Bypasses the mid band compressor
HI. THRE -54.0 dB to 0.0 dB Threshold of the high band compressor
HI. RAT 1:1 to 20:1 Ratio of the high band compressor
HI. ATK 0-120 ms Attack time of the high band compressor
HI. RAT
*1
Release time of the high band compressor
HI. KNEE 0-5 Knee of the high band compressor
HI. BYP OFF/ON Bypasses the high band compressor
LOOKUP 0.0-100.0 ms Lookup delay
MAKE UP OFF/ON Automatically adjusts the output level
Parameter Range Description
Parameter Range Description
ALL BYPASS OFF, ON
Turns bypass on/off for the EQ. Even in the bypassed state, the signal will
pass through the input/output transformers and the amp circuit.
TRIM -12.0 to 12.0 dB Input gain
LF FREQ 30.00 to 300.0 Hz Center frequency of the LF band
LF GAIN -12.0 to 12.0 dB Gain of the LF band
LMF IN OFF, ON Switches the LMF band on/off
LMF Q 0.70 to 5.00 Q of the LMF band
LMF FREQ 50.00 to 400.0 Hz Center frequency of the LMF band
LMF GAIN -12.0 to 12.0 dB Gain of the LMF band
MF IN OFF, ON Switches the MF band on/off
MF Q 0.70 to 5.00 Q of the MF band
MF FREQ 330.0 to 2500 Hz Center frequency of the MF band
MF GAIN -12.0 to 12.0 dB Gain of the MF band
HMF IN OFF, ON Switches the HMF band on/off
HMF Q 0.70 to 5.00 Q of the HMF band
HMF FREQ 1.80k to 16.0k Hz Center frequency of the HMF band
HMF GAIN -12.0 to 12.0 dB Gain of the HMF band
LF/HF IN OFF, ON Switches the LF/HF bands on/off
HF FREQ 2.50k to 25.0k Hz Center frequency of the HF band
HF GAIN -12.0 to 12.0 dB Gain of the HF band
Parameter Range Description
IN OFF, ON
Turns bypass on/off for the compressor. When bypassed, the button will
be unlit. However even in the bypassed state, the signal will pass through
the input/output transformers and the amp circuit.
FB OFF, ON Switches between feed-forward type and feed-back type
THRESHOLD -50.0 to 0.0 dB Threshold level
RATIO 1.10 : 1 to 28.9 : 1, LIMIT Compression ratio
ATTACK 20 to 75 ms Attack time
RELEASE 100 ms to 2.50 sec Release time
GAIN -6.0 to 20.0 dB Output level