User Manual

11. Context menus
In some areas, a context menu appears when you right-click.
A context menu does not appear in the "Devices" area, the "Network" area, or the "Bird’s Eye" view.
11.1. Sheet tabs
The following context menu appears when you right-click a sheet tab.
Menu Content
[Close] Closes the sheet.
11.2. "Project" sheet
The following context menu appears when you right-click the "Project" sheet.
Menu Content
[Paste] Pastes the copied object onto the sheet.
[Select All]
[All]
Selects all objects in the sheet. If you want to select the devices in a
device group, select the device group and then choose [All].
[All Devices]
Selects all devices in the sheet. If you want to select the devices in a
device group, select the device group and then choose [All Devices].
[All Wires]
Selects all wires in the sheet. If you want to select the wires in a device
group, select the device group and then choose [All Wires].
[All Graphics]
Selects all graphics in the sheet. If you want to select the graphics in a
device group, select the device group and then choose [All Graphics].
[Close All Editor Windows] Closes all editors.
[Snap to Grid] If this is checked, objects are placed in alignment with the grid of the
sheet.
11.2.1. Device in the "Project" sheet
The following context menu appears when you right-click a device in the "Project" sheet.
Menu Content
[Open Device] If this item has a check mark, the device’s output jacks are shown. This is
the same as using the [+] button in the upper left of the device. This menu
applies only to power amps.
[Open Device Sheet] Opens the device sheet of the device. This is the same as double-clicking
the device.
[Identify] Causes the indicators of the device to flash for several seconds.
11. Context menus
104 | ProVisionaire Design User Guide