User Manual
Table Of Contents
- Как пользоваться данным справочным руководством
- Оглавление
- Иерархия функций
- Секция SELECTED CHANNEL (Выбранный канал)
- Секция Centralogic
- Подключение на входе и выходе
- Входные каналы
- Прохождение сигналов для входных каналов
- Определение названия и значка канала
- Настройка HA (предусилителя)
- Передача сигнала из входного канала на шину STEREO/MONO
- Добавлена функция панорамы (только для монофонических входных каналов)
- Передача сигнала из входного канала на шину MIX/MATRIX
- Индикация отображения имени канала
- Корректировка задержки между каналами (Задержка на входе)
- Вывод объемного звучания для входных каналов
- Операции с библиотеками каналов
- Эквалайзер и динамический процессор
- Задание канала
- Банки памяти сцен
- Сохранение и загрузка сцен
- Редактирование памяти сцен
- Применение функции Global Paste (Глобальная вставка)
- Использование функции Focus Recall
- Использование функции изменения громкости звука
- Вывод сигнала управления на внешнее устройство вместе с загрузкой сцены (GPI OUT)
- Воспроизведение аудиофайла, связанного с загрузкой сцены
- Использование режима предварительного просмотра
- Функции мониторинга и прослушивания
- Двусторонняя связь и осциллятор
- Индикаторы
- Графический эквалайзер, параметрический эквалайзер, эффекты и PREMIUM RACK
- Устройства ввода-вывода и внешние предусилители
- MIDI
- Функциональные возможности MIDI на консоли серии CL
- Основные настройки MIDI
- Применение изменений программы для вызова сцен и элементов библиотек
- Использование сообщений об изменении элемента управления для управления параметрами
- Использование сообщений об изменениях параметров для параметров органов управления
- Устройство записи
- О средстве записи в память USB
- Назначение входного и выходного канала средства записи
- Запись аудиофайлов на флеш-устройство USB
- Воспроизведение аудиофайлов с флеш-устройства USB
- Редактирование списка названий
- Запись или воспроизведение с помощью программного обеспечения DAW на компьютере
- Использование консоли CL с Nuendo Live
- Управление AFC IMAGE
- Параметры AFC IMAGE
- Окно NETWORK (Сеть) (страница AFC IMAGE)
- Экран SELECTED CHANNEL VIEW (Представление выбранного канала)
- Увеличенный экран AFC IMAGE CONTROL (Управление AFC IMAGE) (1 кан.)
- Увеличенный экран AFC IMAGE CONTROL (Управление AFC IMAGE) (CH 1–32, CH 33–64, CH 65–72)
- Экран SCENE LIST (Список сцен): вкладка AFC IMAGE
- Настройка
- Об экране SETUP (Настройка)
- Пользовательские настройки
- Предпочтения
- Клавиши USER DEFINED (Определяемые пользователем)
- Функции, которые можно назначить определяемым пользователем клавишам USER DEFINED (Определяемые пользователем)
- Определяемые пользователем регуляторы
- Функции, которые можно назначить для регуляторов USER DEFINED
- Доступные для переназначения преобразователи
- Функции, которые можно назначить для доступных для переназначения преобразователей
- Функции регулятора GAIN/PAN/ASSIGN (настраиваемого преобразователя)
- Пользовательский банк фейдеров
- Главный фейдер
- Функции пользовательского банка фейдеров
- Блокировка консоли
- Сохранение и загрузка данных настройки с/на флеш- устройство USB
- Форматирование флеш-устройства USB
- Добавлена функция повторного подключения флеш- устройств USB.
- Настройки синхронизации слов и гнезд
- Использование каскадных подключений
- Основные параметры для шин MIX и MATRIX
- Включение и выключение всего источника фантомного питания
- Настройка яркости сенсорного экрана, светодиодных индикаторов, экранов с названиями каналов и ламп
- Установка даты и времени внутренней синхронизации
- Установка сетевого адреса
- Настройки аудиосети Dante
- Dante Device Lock (Блокировка устройства Dante)
- Поддержка Dante Domain Manager
- Использование универсального интерфейса GPI (General Purpose Interface)
- Функция справки
- Прочие функции
- Инициализация модуля с восстановлением заводских настроек по умолчанию
- Корректировка точки срабатывания сенсорного экрана (Функция калибровки)
- Корректировка фейдеров (Функция калибровки)
- Точная настройка входного и выходного усиления (функция калибровки)
- Регулировка цвета канала (Функция калибровки)
- Регулировка яркости отображения названия канала
- Регулировка контрастности отображения названия канала
- Инициализация настроек консоли аудиосети Dante
- Изменена процедура обновления микропрограммы NAME SUB CPU
- Добавлена функция обновления микропрограммы Dante
- Сообщения об ошибках/предупреждения
- Предметный указатель
- Data List
Data List
38
2 SYSTEM REALTIME MESSAGE
2.1 SONG SELECT (F3)
Reception
Select the track number shown in the TITLE LIST screen of the USB memory
recorder.
2.2 TIMING CLOCK (F8)
Reception
This message is used to control effects. This message is transmitted twenty-four
times per quarter note.
Echoing of this message depends on the OTHER item in the ECHO settings.
2.3 ACTIVE SENSING (FE)
Reception
Once this message has been received, MIDI communication will be initialized
(e.g., Running Status will be cleared) if no message is received for an interval of
400 ms.
This message is not subject to echoing.
2.4 SYSTEM RESET (FF)
Reception
When this message is received, MIDI communication will be initialized (e.g.,
Running Status will be cleared).
This message is not subject to echoing.
3 SYSTEM EXCLUSIVE MESSAGE
3.1 MMC
< MMC STOP >
Reception
If the [DEVICE NO.] matches or is 7F, receives this message and stops.
< MMC PLAY >
Reception
If the [DEVICE NO.] matches or is 7F, receives this message and starts playback.
< MMC DEFERED PLAY >
Reception
If the [DEVICE NO.] matches or is 7F, receives this message and starts playback.
< MMC RECORD STROBE >
Reception
If the [DEVICE NO.] matches or is 7F, receives this message, and if stopped, starts
recording.
< MMC PAUSE >
Reception
If the [DEVICE NO.] matches or is 7F, receives this message, and if playing, pauses.
3.2 BULK DUMP
This message is used to send or receive the contents of various memories stored
within the unit.
The basic format is as follows.
The CL series console uses the following data types for a bulk dump.
*1) 0-300 Scene Number (0 Request Only),
*2) 1-199 Input EQ Library Number (1-40 Request Only)
*3) 1-199 Output EQ Library Number (1-3 Request Only)
*4) 1-199 Dynamics Library Number (1-41 Request Only)
*5) 0-199 GEQ Library Number (0 Request Only)
*6) 1-199 Effect Library Number (1-27 Request Only)
*7) 512-583 Input 1-72,
*8) 584-599 STIN 1L-8R,
*9) 768-791 MIX 1-24,
*10) 1024-1031 MATRIX 1-8,
*11) 1280-1282 STEREO L-C,
*12) 512-530 GEQ 1-19, 531-538 EFFECT GEQ 1-8,
*13) 0-199 8BandPEQ Library Number (0 Request Only)
*14) 512-519 EFFECT 1-8,
*15) 512 Current Data,
*16) 768 Current Data with Recall Safe,
*17) 8192 Store Undo Data, 8193 Recall Undo Data, 8194 Clear Undo Data,
*18) 0-199 Input CH Library Number (0 Request Only),
*19) 0-199 Output CH Library Number (0 Request Only),
*20) 512-527 Premium Rack 1A, 1B, 2A, … 8A, 8B
*21) 0-100 Each Premium Effect Library Number (0 Request Only)
*22) 1536-1607 Input 1-72 (for Dynamics2),
*23) 1608-1623 STIN 1L-8R (for Dynamics2),
*24) 0-10 Dante Input Patch Library Number (0 Request Only)
Data is lost when you write to the preset library.
The unique header (Model ID) identifies whether the device is a CL series.
To calculate the check sum, add the bytes starting with the byte after BYTE
COUNT (LOW) and ending with the byte before CHECK SUM, take the binary
complement, and set bit 7 to 0.
CHECK SUM = (-sum)&0x7F
Bulk Dumps can be received at any time, and can be transmitted at any time
when a Bulk Dump Request is received.
A Bulk Dump is transmitted on the [Rx CH] channel in response to a Bulk Dump
Request.
STATUS 11110011 F3
Song select
Song number 0sssssss ss
Song number (0-127)
STATUS 11111000 F8
Timing clock
STATUS 11111110 FE
Active sensing
STATUS 11111111 FF
System reset
STATUS 11110000 F0
System exclusive message
ID No. 01111111 7F
Real time System exclusive
Device ID 0ddddddd dd
Destination (00-7E, 7F:all call)
COMMAND 00000110 06
Machine Control Command(MCC) sub-id
00000001 01
Stop(MCS)
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01111111 7F
Real time System exclusive
Device ID 0ddddddd dd
Destination (00-7E, 7F:all call)
COMMAND 00000110 06
Machine Control Command(MCC) sub-id
00000010 02
Play(MCS)
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01111111 7F
Real time System exclusive
Device ID 0ddddddd dd
Destination (00-7E, 7F:all call)
COMMAND 00000110 06
Machine Control Command(MCC) sub-id
00000011 03
Deferred Play(MCS)
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01111111 7F
Real time System exclusive
Device ID 0ddddddd dd
Destination (00-7E, 7F:all call)
COMMAND 00000110 06
Machine Control Command(MCC) sub-id
00000110 06
Record strobe
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01111111 7F
Real time System exclusive
Device ID 0ddddddd dd
Destination (00-7E, 7F:all call)
COMMAND 00000110 06
Machine Control Command(MCC) sub-id
00001001 09
Pause(MCS)
EOX 11110111 F7
End of exclusive
Command rx/tx Function
F0 43 0n 3E cc cc 19 mm ... mm dd
dd ... ee F7
rx/tx
BULK DUMP DATA
F0 43 2n 3E 19 mm ... mm dd dd F7 rx
BULK DUMP REQUEST
Module Name(mm) Data Number(dd)
SCENE LIB “SCENE___” *1) *15) *16) *17)
INPUT EQ LIB “INEQ____” *2) *7) *8)
OUTPUT EQ LIB “OUTEQ___” *3) *9) *10) *11)
Dynamics LIB “DYNA____” *4) *7) *8) *9) *10) *11) *22) *23)
INPUT CH LIB “INCHNNL_” *18) *7) *8)
OUTPUT CH LIB “OUTCHNNL” *19) *9) *10) *11)
GEQ LIB “GEQ_____” *5) *12)
8BandPEQ LIB “8PEQ____” *13)
EFFECT LIB “EFFECT__” *6) *14)
Premium Effect “PEFFECT_” *20)
Portico5033 LIB “P5033___” *21)
Portico5043 LIB “P5043___” *21)
Portico5045 LIB “P5045____” *21)
U76 LIB “U76_____” *21)
Opt-2A LIB “OPT-2A__” *21)
EQP-1A LIB “EQ-1A___” *21)
DynamicEQ LIB “DYNAEQ__” *21)
Buss Comp 369 LIB “BSCMP369” *21)
MBC4 LIB “MBC4____” *21)
Dante Input Patch LIB “DANTEIN_” *24)
Mixer Setup “MIXERSET” Fix (512)
Outport Setup “OUT_PORT” Fix (512)
Monitor Setup “MONITOR_” Fix (512)
MIDI Setup “MIDI_SET” Fix (512)
Lib Number “LIB_NUM_” Fix (512)
Program Change Table “PRGMCHG_” Fix (512)
Control Change Table “CTRLCHG_” Fix (512)
Preference (Current) “PREF_CUR” Fix (512)
Preference (Admin) “PREF_ADM” Fix (512)
Preference (Guest) “PREF_GST” Fix (512)
User Defined Keys (Current) “UDEF_CUR” Fix (512) include Knob, Encoder
User Defined Keys (Admin) “UDEF_ADM” Fix (512) include Knob, Encoder
User Defined Keys (Guest) “UDEF_GST” Fix (512) include Knob, Encoder
Custom Fader Bank (Current) “CFAD_CUR” Fix (512)
Custom Fader Bank (Admin) “CFAD_ADM” Fix (512)
Custom Fader Bank (Guest) “CFAD_GST” Fix (512)
User Level (Current) “UKEY_CUR” Fix (512)
User Level (Guest) “UKEY_GST” Fix (512)
Module Name(mm) Data Number(dd)