User Manual

Mixing parameter operation applicability
51 RIVAGE PM series Data List
Mixing parameter operation applicability
This table indicates which settings affect the behavior of each input channel, mix channel, matrix channel, stereo channel and DCA parameter.
The table also indicates whether the parameters can be linked for a stereo pair, or whether they can be the target of a GAIN GANG ON, DELAY GANG ON, RECALL SAFE, or FOCUS RECALL operation.
■ Input channels
Parameter Linked by pairing GAIN GANG ON DELAY GANG ON
RECALL SAFE, FOCUS RECALL
ALL Individual filter settings
HA
A.Gain O O HA A.GAIN
Gain Compensation O O HA A.GAIN
+48V OHA A.GAIN
Silk O O HA SILK
Phase O HA PHASE
M/S Decode On O HA M/S DECODE
M/S Decode Side Gain O HA M/S DECODE
Gain Gang O O HA A.GAIN, D.GAIN
Pair O * If any of the channel filter settings is turned ON.
Stereo Input Type O O * If any of the channel filter settings is turned ON.
Name, Icon, Color O O NAME
Input Patch
Patch OPATCH
A/B Select O O PATCH
Virtual Sound Check
Out Patch OPATCH
In Patch OPATCH
Individual channel ON/Off O O PATCH
Phase OPHASE
Digital Gain OOD.GAIN
Insert1
*1 (with OUTBOARD INSERT)
Out Patch
*1
PLUG-IN/GEQ ALLOCATION
In Patch
*1
PLUG-IN/GEQ ALLOCATION
A.Gain, Gain Compensation,
+48V, Silk, Phase, M/S Decode
*1
GEQ/PEQ
* The mounted status is specified by the PLUG-IN/GEQ ALLOCATION settings, and
the parameters are specified for each GEQ.
Plug-in
* The mounted status is specified by the PLUG-IN/GEQ ALLOCATION settings, and
the parameters are specified for each plug-in.
On O O INS 1
Point O O INS 1
Bypass OINS 1
Insert2 * Same as Insert1 OINS 2
Direct Out
Out Patch OD.OUT
On, Level O O D.OUT
Point O O D.OUT