User Manual

Message Meaning
USB recorder: Recording stopped due to wrong word clock!
Recording on the USB recorder was stopped due to an
inappropriate system word clock.
USB recorder: Storage full! There is insufficient capacity in the USB storage device.
USB recorder: Storage mounted The USB storage device is mounted.
USB recorder: Storage protected! The USB storage device is protected.
USB recorder: This is the root folder for song files
You cannot browse the hierarchy above the root directory for
the song files.
Word Clock Master changed. [ 'LOCATION' ] : 'DSP xx'
The word clock master was switched. [Location]: The Unit ID
of the DSP engine that became the word clock master (If a
DSP engine outside the console network became the word
clock master, the DSP engine’s Unit ID is displayed as OTHER
DEVICE.)
Version mismatch.
There is an incompatibility between the versions of the R-
series unit and of the Dante-enabled HY card.
Word Clock Sync Error!
The word clock settings in the Dante audio network are
incorrect. Display the WORD CLOCK screen and configure the
settings.
Wrong password!
You have entered an incorrect password to unlock the
console.
Wrong word clock!
The system word clock is inappropriate. Supply an
appropriate word clock.
XX parameters set to default
XX parameters are reset to their default values. (“XX”
represents the type, such as “EQ,” or “Dynamics1.”)
1010
Messages > Messages