User Manual

Knobs in the screen provide visual confirmation of the value of the corresponding parameter. If you press a
knob once in the window, a thick frame appears around the knob. This frame indicates that the knob is
selected for operations that can be controlled by the [TOUCH AND TURN] knob (pink highlight), [Fn] knob
(yellow highlight), or screen encoders (white highlight).
Touch sensitive (only for CS-R5)
Touching a knob on the panel will highlight the corresponding knob in the SELECTED CHANNEL VIEW screen.
In this way, visual movement will be minimized and you will be able to focus on your work. In other screens,
a popup window will open, enabling you to see the value before operating the controls.
List windows
Windows similar to the following enable you to select items from a list, such as the USER DEFINED knob
setting window.
The highlighted item in the middle of the list is the item that is selected for operation. Press the screen
encoders located below the list to scroll the list upward or downward.
NOTE
You can also scroll the list up or down by using the [TOUCH AND TURN] knob.
Keyboard window
The following keyboard window will appear when you need to assign a name or comment to a scene or
library, or when you need to assign a channel name. Press character buttons in the window to enter the
desired characters.
112
Basic operations on the panel > On-screen user interface