User Manual

Using tool buttons
The title bar on top of certain popup windows features tool buttons that provide additional functions. These
buttons enable you to recall related libraries, or copy channel parameters to another channel. This section
explains how to use the tool buttons.
About the tool buttons
EQ, Dynamics, Delay, GEQ/PEQ, and Plug-in popup windows feature the following tool buttons:
2 3 4 51
a
Recalls a library related to the current popup window (such as EQ, Dynamics, GEQ/PEQ, or Plug-in library).
b
DEFAULT button
Resets the EQ or Dynamics of the currently-selected channel, or GEQ/PEQ or Plug-in to their default settings.
c
COPY button
Copies the EQ, Dynamics, or Delay parameter settings of the currently-selected channel, or the GEQ/PEQ or Plug-in
settings. Copied settings will be stored in buffer memory (a temporary storage area).
d
PASTE button
Pastes the settings stored in buffer memory to the EQ, Dynamics, or Delay of the currently-selected channel, or GEQ/
PEQ or Plug-ins.
e
COMPARE button
Switches between and compares the settings stored in buffer memory and the EQ or Dynamics of the currently-
selected channel, or GEQ/PEQ or Plug-in settings.
Copying and pasting parameters
You can copy the EQ, Dynamics, or Delay parameter settings of the currently-selected channel, or GEQ/PEQ
or Plug-in settings to buffer memory, and then paste them to corresponding parameters for other channels,
or a similar type of GEQ/PEQ or Plug-in.
NOTE
(
The EQ and Dynamics parameter settings will be copied and pasted per bank (A/B). You can copy and paste the parameters
between Bank A and B of the same channel. For example, you can copy the parameter settings for Dynamics 1 on CH1 in Bank A to
Dynamics 2 on CH144 in Bank B.
(
If 15 bands or less are used for 31BandGEQ, those parameter settings can also be copied to Flex15GEQ.
1 Open a popup window that features tool buttons.
2 Select a channel EQ, Dynamics, or Delay, or GEQ/PEQ or Plug-in as the copy source.
123
Basic operations on the panel > Using tool buttons