User Manual

3 Press the COPY button.
The current setting will be stored in buffer memory.
NOTE
(
After copying a setting, be sure to paste it to the destination BEFORE you copy another setting. Otherwise, the copied
setting (in buffer memory) will be overwritten.
(
You can select only one channel, GEQ/PEQ, or plug-in as the copy source.
4 Press the PASTE button.
The channel EQ, Dynamics or Delay setting, or GEQ/PEQ or Plug-in setting (selected in Step 2)
will be pasted.
NOTE
(
Please note that pasting the copied settings will overwrite the settings that are currently residing in the paste
destination.
(
If no data is stored in buffer memory, or if the data in buffer memory is not compatible with the data in the paste
destination, the PASTE button will be disabled.
124
Basic operations on the panel > Using tool buttons